DEVM_1.3.6.1.4.1.2011.5.25.157.2.24 hwSfbereAlarmResume

Trap Buffer Description

Exceeding block error B2 counter in the multiplex section alarm resume.(hwPhysicalPortIfIndex=[hwPhysicalPortIfIndex],BoardID=[hwPhysicalPortInSlot],CardID=[hwPhysicalPortInCard],PortID=[hwPhysicalPortInPort],InterfaceName=[hwPhysicalPortName])

In VS mode, this trap is supported only by the admin VS.

Trap Attributes

Trap Attribute	Description
Alarm or Event	Alarm
Trap Severity	Critical
Mnemonic Code	hwMsB2SfAlarm
Trap OID	1.3.6.1.4.1.2011.5.25.157.2.24
MIB	HUAWEI-PORT-MIB
Alarm ID	0x08130080
Alarm Name	hwSfbereAlarm
Alarm Type	communicationsAlarm
Raise or Clear	Clear
Match trap	DEVM_1.3.6.1.4.1.2011.5.25.157.2.23 hwSfbereAlarm

Trap Buffer Parameters

Parameter	Description
hwPhysicalPortIfIndex	Index of physical port.
hwPhysicalPortInSlot	Slot ID.
hwPhysicalPortInCard	Card ID.
hwPhysicalPortInPort	Port ID.
hwPhysicalPortName	Name of physical port.

VB Parameters

VB OID	VB Name	VB Index
1.3.6.1.4.1.2011.5.25.157.1.8.1.1.6	hwPhysicalPortInSlot	hwPhysicalPortIfIndex
1.3.6.1.4.1.2011.5.25.157.1.8.1.1.7	hwPhysicalPortInCard	hwPhysicalPortIfIndex
1.3.6.1.4.1.2011.5.25.157.1.8.1.1.8	hwPhysicalPortInPort	hwPhysicalPortIfIndex
1.3.6.1.4.1.2011.5.25.157.1.8.1.1.4	hwPhysicalPortName	hwPhysicalPortIfIndex

Impact on the System

Services are not affected.

Possible Causes

Cause 0: The fault triggering the alarm was rectified.
Cause 1: The fault triggering the alarm was rectified.
Cause 2: The fault triggering the alarm was rectified.
Cause 3: The fault triggering the alarm was rectified.
Cause 4: The fault triggering the alarm was rectified.

Procedure

This trap message is informational only, and no action is required.