DEVM_1.3.6.1.4.1.2011.5.25.157.2.272 hwFlexEPhyRemoteFaultAlarm

Trap Buffer Description

The remote fault alarm of FlexE physical interface has occurred.(hwPhysicalPortIfIndex=[hwPhysicalPortIfIndex], hwPhysicalPortName=[hwPhysicalPortName])

The remote fault alarm of FlexE physical interface has occurred.

In VS mode, this trap is supported only by the admin VS.

Trap Attributes

Trap Attribute	Description
Alarm or Event	Alarm
Trap Severity	Error
Mnemonic Code	hwFlexEPhyRemoteFaultAlarm
Trap OID	1.3.6.1.4.1.2011.5.25.157.2.272
MIB	HUAWEI-PORT-MIB
Alarm ID	0x00F10213
Alarm Name	hwFlexEPhyRemoteFaultAlarm
Alarm Type	equipmentAlarm
Raise or Clear	Raise
Match trap	DEVM_1.3.6.1.4.1.2011.5.25.157.2.273 hwFlexEPhyRemoteFaultAlarmResume

Trap Buffer Parameters

Parameter	Description
hwPhysicalPortIfIndex	Index of physical port.
hwPhysicalPortName	Name of physical port.

VB Parameters

VB OID	VB Name	VB Index
1.3.6.1.4.1.2011.5.25.157.1.8.1.1.1	hwPhysicalPortIfIndex	hwPhysicalPortIfIndex
1.3.6.1.4.1.2011.5.25.157.1.8.1.1.4	hwPhysicalPortName	hwPhysicalPortIfIndex

Impact on the System

Services may be switched or interrupted.

Possible Causes

The remote FlexE physical interface has faults.

Procedure

1.Clear the FlexE local fault alarm of remote FlexE physical interface, Then check whether the alarm is cleared.

If the alarm is cleared, go to Step 3.
If the alarm is not cleared, go to Step 2.

2.Collect alarm information, log information and configuration information, and then contact technical support personnel.

3.End.