DEVM_1.3.6.1.4.1.2011.5.25.157.2.276 hwFlexEPhyDelayOverAlarm

Trap Buffer Description

The delay difference of FlexE physical interfaces in the same group is abnormal.(hwPhysicalIndex=[hwPhysicalIndex], hwPhysicalPortList=[hwPhysicalPortList])

The delay difference of FlexE physical interfaces in the same group is abnormal.

In VS mode, this trap is supported only by the admin VS.

Trap Attributes

Trap Attribute	Description
Alarm or Event	Alarm
Trap Severity	Alert
Mnemonic Code	hwFlexEPhyDelayOverAlarm
Trap OID	1.3.6.1.4.1.2011.5.25.157.2.276
MIB	HUAWEI-PORT-MIB
Alarm ID	0x00F10210
Alarm Name	hwFlexEPhyDelayOverAlarm
Alarm Type	equipmentAlarm
Raise or Clear	Raise
Match trap	DEVM_1.3.6.1.4.1.2011.5.25.157.2.277 hwFlexEPhyDelayOverAlarmResume

Trap Buffer Parameters

Parameter	Description
hwPhysicalIndex	Physical Index.
hwPhysicalPortList	Physical interface List.

VB Parameters

VB OID	VB Name	VB Index
1.3.6.1.4.1.2011.5.25.157.1.8.1.1.1	hwPhysicalPortIfIndex	hwPhysicalPortIfIndex
1.3.6.1.4.1.2011.5.25.157.1.8.1.1.38	hwPhysicalPortList	hwPhysicalPortIfIndex

Impact on the System

Services may be switched or interrupted.

Possible Causes

The delay difference of FlexE physical interfaces in the same group is abnormal.

Procedure

1.Use same fiber paths between the FlexE physical interfaces in the same group.Then check whether the alarm is cleared.

If the alarm is cleared, go to Step 3.
If the alarm is not cleared, go to Step 2.

2.Collect alarm information, log information and configuration information, and then contact technical support personnel.

3.End.