The physical entity was installed unstably. (EntityPhysicalIndex=[EntityPhysicalIndex], EntPhysicalName=[EntPhysicalName], EntityTrapEntType=[EntityTrapEntType], EntityTrapFaultID=[143360], Reason=The board was improperly installed.)
A physical entity, such as a board, a power module, or a fan module, was installed improperly.
In VS mode, this trap is supported only by the admin VS.
| Trap Attribute | Description |
|---|---|
Alarm or Event |
Alarm |
Trap Severity |
Warning |
Mnemonic Code |
hwUnstableAlarm |
Trap OID |
1.3.6.1.4.1.2011.5.25.219.2.10.11 |
MIB |
HUAWEI-ENTITY-TRAP-MIB |
Alarm ID |
0x0813000f |
Alarm Name |
hwUnstableAlarm |
Alarm Type |
equipmentAlarm |
Raise or Clear |
Raise |
Match trap |
DEVM_1.3.6.1.4.1.2011.5.25.219.2.10.12 hwUnstableResume-143360 |
| Parameter | Description |
|---|---|
EntityPhysicalIndex |
The index for this entry. |
EntPhysicalIndex |
Physical Index. |
EntityTrapEntType |
The textual name of the physical entity. |
EntityTrapFaultID |
To describe the fault id of trap. |
EntPhysicalName |
The index for this entry. |
Reason |
Reason. |
| VB OID | VB Name | VB Index |
|---|---|---|
1.3.6.1.4.1.2011.5.25.219.1.1 |
hwEntityPhysicalIndex |
- |
1.3.6.1.2.1.47.1.1.1.1.7 |
entPhysicalName |
entPhysicalIndex |
1.3.6.1.4.1.2011.5.25.219.1.2 |
hwEntityTrapEntType |
- |
1.3.6.1.4.1.2011.5.25.219.1.3 |
hwEntityTrapFaultID |
- |
1. If the board runs no services after being inserted into the slot, check whether the board is properly inserted, whether there are bent pins, or whether the board connector is faulty.
2. If the board is not properly inserted, insert the board properly.
3. If there are bent pins, do not insert a new board into this slot. Collect trap, log, and configuration information, and contact technical support personnel.
4. If the board connector is faulty, replace the board.
5. If the board runs services normally after being inserted into the slot, collect trap, log, and configuration information, and contact technical support personnel.
6. End.