DEVM_1.3.6.1.4.1.2011.5.25.219.2.2.5 hwBoardInvalid-131843

Trap Buffer Description

The board totally failed. (EntityPhysicalIndex=[EntityPhysicalIndex], EntPhysicalIndex=[EntPhysicalIndex], EntPhysicalName=[EntPhysicalName], EntityType=[EntityType], EntityTrapFaultID=131843, Reason=The board info of the mpu conflicted.)

The overall function of the board does not take effect.

In VS mode, this trap is supported only by the admin VS.

Trap Attributes

Trap Attribute	Description
Alarm or Event	Alarm
Trap Severity	Alert
Mnemonic Code	hwBoardInvalid
Trap OID	1.3.6.1.4.1.2011.5.25.219.2.2.5
MIB	HUAWEI-ENTITY-TRAP-MIB
Alarm ID	0x0813002e
Alarm Name	hwBoardInvalid
Alarm Type	equipmentAlarm
Raise or Clear	Raise
Match trap	DEVM_1.3.6.1.4.1.2011.5.25.219.2.2.6 hwBoardInvalidResume-131843

Trap Buffer Parameters

Parameter	Description
EntityPhysicalIndex	Indicates the index of the physical entity.
EntPhysicalIndex	Indicates the index of the physical entity.
EntityTrapFaultID	Indicates the error code.
EntPhysicalName	Indicates the name of the entity such as a chassis.
EntityType	Indicates the type of the physical entity. The value can be one of the following: 1: mpu(1) 2: lpu(2) 3: sfu(3) 4: pic(4) 5: cfcard(5) 6: ofc(6) 7: npu(7)
Reason	Indicates the description of the cause of the trap.

VB Parameters

VB OID	VB Name	VB Index
1.3.6.1.4.1.2011.5.25.219.1.1	hwEntityPhysicalIndex	-
1.3.6.1.2.1.47.1.1.1.1.7	entPhysicalName	entPhysicalIndex
1.3.6.1.4.1.2011.5.25.219.1.2	hwEntityTrapEntType	-
1.3.6.1.4.1.2011.5.25.219.1.3	hwEntityTrapFaultID	-
1.3.6.1.4.1.2011.5.25.219.1.13	hwEntityTrapReasonDescr	-
1.3.6.1.4.1.2011.5.25.31.1.1.1.1.2	hwEntityOperStatus	entPhysicalIndex

Procedure

1. Run the display chassis-id all command in the system view to check whether the current and peer chassis have the same ID.

If they have the same chassis ID, go to Step 2.
If they have different chassis IDs, go to Step 3.

2. Run the set chassis-id command in the system view of the current or peer chassis to set a different chassis ID. Restart the device and check whether the alarm is cleared.

If the alarm persists, go to Step 3.
If the alarm is cleared, go to Step 5.

3. Run the display version slot command in the system view to check whether the current and peer chassis have the same MPU type and memory size.

If they have the same MPU type and memory size, go to Step 4.
If they have different MPU types or memory sizes, replace one of the MPUs.

4. Collect trap, log, and configuration information, and contact technical support.

5. End.