The partial function of optical module failed. (EntityPhysicalIndex=[EntityPhysicalIndex], EntPhysicalIndex=[EntPhysicalIndex], EntPhysicalName=[EntPhysicalName], EntityTrapFaultID=[148224], ReasonDescription=After the optical module was inserted, its configuration was not supported.)
After the optical module was inserted, its configuration was not supported.
| Trap Attribute | Description |
|---|---|
Alarm or Event |
Alarm |
Trap Severity |
Alert |
Mnemonic Code |
hwOptCfgNotMatch |
Trap OID |
1.3.6.1.4.1.2011.5.25.219.2.4.17 |
MIB |
HUAWEI-ENTITY-TRAP-MIB |
Alarm ID |
0x08012231 |
Alarm Name |
hwOptCfgNotMatch |
Alarm Type |
equipmentAlarm |
Raise or Clear |
Raise |
Match trap |
DEVM_1.3.6.1.4.1.2011.5.25.219.2.4.18 hwOptCfgNotMatchResume-148224 |
| Parameter | Description |
|---|---|
EntityPhysicalIndex |
Index of the physical entity. |
EntPhysicalIndex |
Index of the physical entity. |
EntPhysicalName |
Name of the physical entity. |
EntityTrapFaultID |
Error code. |
ReasonDescription |
Indicates the description of the possible cause. |
| VB OID | VB Name | VB Index |
|---|---|---|
1.3.6.1.4.1.2011.5.25.219.1.1 |
hwEntityPhysicalIndex |
- |
1.3.6.1.2.1.47.1.1.1.1.7 |
entPhysicalName |
entPhysicalIndex |
1.3.6.1.4.1.2011.5.25.219.1.3 |
hwEntityTrapFaultID |
- |
1.3.6.1.4.1.2011.5.25.219.1.13 |
hwEntityTrapReasonDescr |
- |
1.Reconfigure the FEC mode, signal modulation mode, attenuation value, or wavelength number on the interface, and check whether the alarm is cleared.
2.Collect alarm information, log information and configuration information, and then contact technical support personnel.
3.End.