The optical module failed completely. (EntityPhysicalIndex=[EntityPhysicalIndex], EntPhysicalIndex=[EntPhysicalIndex], EntPhysicalName=[EntPhysicalName], EntityTrapFaultID=136229, ReasonDescription=The fiber or optical module on card is abnormal.)
The optical module failed completely.
| Trap Attribute | Description |
|---|---|
Alarm or Event |
Alarm |
Trap Severity |
Alert |
Mnemonic Code |
hwOpticalInvalid |
Trap OID |
1.3.6.1.4.1.2011.5.25.219.2.4.5 |
MIB |
HUAWEI-ENTITY-TRAP-MIB |
Alarm ID |
0x08130059 |
Alarm Name |
hwOpticalInvalid |
Alarm Type |
equipmentAlarm |
Raise or Clear |
Raise |
Match trap |
DEVM_1.3.6.1.4.1.2011.5.25.219.2.4.6 hwOpticalInvalidResume-136229 |
| Parameter | Description |
|---|---|
EntityPhysicalIndex |
Index of the physical entity. |
EntPhysicalIndex |
Index of the physical entity. |
EntityTrapFaultID |
Error code. |
EntPhysicalName |
Name of the physical entity. |
ReasonDescription |
Indicates the description of the possible cause. |
| VB OID | VB Name | VB Index |
|---|---|---|
1.3.6.1.4.1.2011.5.25.219.1.1 |
hwEntityPhysicalIndex |
- |
1.3.6.1.2.1.47.1.1.1.1.7 |
entPhysicalName |
entPhysicalIndex |
1.3.6.1.4.1.2011.5.25.219.1.3 |
hwEntityTrapFaultID |
- |
1. Check whether the optical fiber fails. If the optical fails, replace it.
2. Check whether the local wavelength and remote wavelength are the same. If they are different, change the channel number.
3. Check whether alarm information exists on the local interface. If alarm information exists, replace the optical module of the local interface.
4. Check whether alarm information exists on the remote interface. If alarm information exists, replace the optical module of the remote interface.
5. If the alarm persists after the optical module is replaced, collect trap, log, and configuration information, and contact technical support.
6.End.