DEVM_1.3.6.1.4.1.2011.5.25.219.2.4.5 hwOpticalInvalid-136233

Trap Buffer Description

The optical module failed completely. (EntityPhysicalIndex=[EntityPhysicalIndex], EntPhysicalIndex=[EntPhysicalIndex], EntPhysicalName=[EntPhysicalName], EntityTrapFaultID=136233, ReasonDescription=The Smart-Clock module failed to obtain leap second information in Single-GLONASS mode or GPS-GLONASS mode.)

The optical module failed completely.

Trap Attributes

Trap Attribute	Description
Alarm or Event	Alarm
Trap Severity	Alert
Mnemonic Code	hwOpticalInvalid
Trap OID	1.3.6.1.4.1.2011.5.25.219.2.4.5
MIB	HUAWEI-ENTITY-TRAP-MIB
Alarm ID	0x08130059
Alarm Name	hwOpticalInvalid
Alarm Type	equipmentAlarm
Raise or Clear	Raise
Match trap	DEVM_1.3.6.1.4.1.2011.5.25.219.2.4.6 hwOpticalInvalidResume-136233

Trap Buffer Parameters

Parameter	Description
EntityPhysicalIndex	Index of the physical entity.
EntPhysicalIndex	Index of the physical entity.
EntityTrapFaultID	Error code.
EntPhysicalName	Name of the physical entity.
ReasonDescription	Indicates the description of the possible cause.

VB Parameters

VB OID	VB Name	VB Index
1.3.6.1.4.1.2011.5.25.219.1.1	hwEntityPhysicalIndex	-
1.3.6.1.2.1.47.1.1.1.1.7	entPhysicalName	entPhysicalIndex
1.3.6.1.4.1.2011.5.25.219.1.3	hwEntityTrapFaultID	-

Impact on the System

The frequency synchronous and time synchronous functions may be affected on the interface where the module is installed.

Possible Causes

The Smart-Clock module failed to obtain leap second information in Single-GLONASS mode or GPS-GLONASS mode.

Procedure

1. Run the smart-clock gnss-model command in the GE-interface view to switch to the other mode(GPS, BEIDOU, GPS-BEIDOU). Then check whether the alarm is cleared.

If the alarm is cleared, go to Step 4.
If the alarm persists, go to Step 2.

2. Run the smart-clock leap command in the GE-interface view to configure leap second information. Then check whether the alarm is cleared.

If the alarm is cleared, go to Step 4.
If the alarm persists, go to Step 3.

3. Collect trap, log, and configuration information, and contact technical support.

4. End.