DEVM_1.3.6.1.4.1.2011.5.25.219.2.5.7 hwPowerUnusable

Trap Buffer Description

The power was unavailable.(EntityPhysicalIndex=[EntityPhysicalIndex], EntPhysicalName=[EntPhysicalName], EntityTrapFaultID=[EntityTrapFaultID], Reason=[Reason])

The power was unavailable.

In VS mode, this trap is supported only by the admin VS.

Trap Attributes

Trap Attribute	Description
Alarm or Event	Alarm
Trap Severity	Warning
Mnemonic Code	hwPowerUnusable
Trap OID	1.3.6.1.4.1.2011.5.25.219.2.5.7
MIB	HUAWEI-ENTITY-TRAP-MIB
Alarm ID	0x08130050
Alarm Name	hwPowerUnusable
Alarm Type	equipmentAlarm
Raise or Clear	Raise
Match trap	DEVM_1.3.6.1.4.1.2011.5.25.219.2.5.8 hwPowerUnusableResume

Trap Buffer Parameters

Parameter	Description
EntityPhysicalIndex	The index for this entry.
EntPhysicalName	The textual name of the physical entity.
EntityTrapFaultID	To describe the fault id of trap.
Reason	Reason.

VB Parameters

VB OID	VB Name	VB Index
1.3.6.1.4.1.2011.5.25.219.1.1	hwEntityPhysicalIndex	-
1.3.6.1.2.1.47.1.1.1.1.7	entPhysicalName	entPhysicalIndex
1.3.6.1.4.1.2011.5.25.219.1.3	hwEntityTrapFaultID	-

Impact on the System

Services will not be affected. To prevent failure of another power module, replace the faulty power module.

Possible Causes

The power module was unavailable.

Procedure

1. Replace the power module, and then check whether the alarm is cleared.

If so, go to Step 3.
If not, go to step 2.

2. Collect the alarm information, log information, and configuration information, and contact technical support personnel.

3. End.