DRIVER_1.3.6.1.4.1.2011.5.25.157.2.315 hwFlexEGrpNegotiationFail

Trap Buffer Description

FlexE group negotiation fail alarm. (GroupIndex=[hwFlexEGroupIndex],GroupName=[hwFlexEGroupName])

FlexE group negotiation fail alarm.

In VS mode, this trap is supported only by the admin VS.

Trap Attributes

Trap Attribute	Description
Alarm or Event	Alarm
Trap Severity	Error
Mnemonic Code	hwFlexEGrpNegotiationFail
Trap OID	1.3.6.1.4.1.2011.5.25.157.2.315
MIB	HUAWEI-PORT-MIB
Alarm ID	0x080122a3
Alarm Name	hwFlexEGrpNegotiationFail
Alarm Type	communicationsAlarm
Raise or Clear	Raise
Match trap	DRIVER_1.3.6.1.4.1.2011.5.25.157.2.316 hwFlexEGrpNegotiationFailResume

Trap Buffer Parameters

Parameter	Description
hwFlexEGroupIndex	Index of FlexE group.
hwFlexEGroupName	Name of FlexE Group.

VB Parameters

VB OID	VB Name	VB Index
1.3.6.1.4.1.2011.5.25.157.1.30.5	hwFlexEGroupIndex	-
1.3.6.1.4.1.2011.5.25.157.1.30.6	hwFlexEGroupName	-

Impact on the System

Services of the interface will be affected.

Possible Causes

Static mode and dynamic mode docking, dynamic mode one side of the negotiation failed.

Procedure

1. Check whether the timeslot negotiation modes configured for the groups at both ends are consistent.

If yes, go to step 3.
If no, go to step 2.

2. Run the timeslot-negotiation mode command to configure the same timeslot mode for the two groups at both ends, that is, static mode or dynamic negotiation mode. Then, check whether the alarm is cleared.

If yes, go to step 4.
If no, go to step 3.

3. Collect alarm, log, and configuration information, and contact technical support personnel.

4. End.