EOAM-1AG_1.3.6.1.4.1.2011.5.25.157.2.283 hwEthoamClosePortAlarm

Trap Buffer Description

NNI or Remote UNI fault, the service UNI interface is closed by Ethernet OAM PortLink Function.(PhysicalIndex=[PhysicalIndex],ChassisId=[ChassisId],SlotId=[SlotId],CardId=[CardId],PortId=[PortId],PortDecrip =[PortDescrip],MepId=[MepId],UniName=[UniName]).

The physical interface is disabled by Ethernet OAM.

Trap Attributes

Trap Attribute	Description
Alarm or Event	Alarm
Trap Severity	Critical
Mnemonic Code	ETHOAM_CFG_CLOSEPORT
Trap OID	1.3.6.1.4.1.2011.5.25.157.2.283
MIB	HUAWEI-PORT-MIB
Alarm ID	0x00F10237
Alarm Name	hwEthoamClosePortAlarm
Alarm Type	qualityOfServiceAlarm
Raise or Clear	Raise
Match trap	EOAM-1AG_1.3.6.1.4.1.2011.5.25.157.2.287 hwEthoamClosePortAlarmResume

Trap Buffer Parameters

Parameter	Description
PhysicalIndex	The Index of physical port.
ChassisId	Indicates the chassis number.
SlotId	Indicates the slot number.
CardId	Indicates the card number.
PortId	Indicates the port number.
PortDescrip	Indicates the description of port.
MepId	Indicates the Mep number.
UniName	The name of Uni interface.

VB Parameters

VB OID	VB Name	VB Index
1.3.6.1.4.1.2011.5.25.157.1.8.1.1.1	hwPhysicalPortIfIndex	hwPhysicalPortIfIndex
1.3.6.1.4.1.2011.5.25.157.1.8.1.1.5	hwPhysicalPortInChassis	hwPhysicalPortIfIndex
1.3.6.1.4.1.2011.5.25.157.1.8.1.1.6	hwPhysicalPortInSlot	hwPhysicalPortIfIndex
1.3.6.1.4.1.2011.5.25.157.1.8.1.1.7	hwPhysicalPortInCard	hwPhysicalPortIfIndex
1.3.6.1.4.1.2011.5.25.157.1.8.1.1.8	hwPhysicalPortInPort	hwPhysicalPortIfIndex
1.3.6.1.4.1.2011.5.25.157.1.8.1.1.4	hwPhysicalPortName	hwPhysicalPortIfIndex
1.3.6.1.4.1.2011.5.25.157.1.8.8.1.1	hwMepId	hwPhysicalPortIfIndex
1.3.6.1.4.1.2011.5.25.157.1.8.8.1.2	hwUniName	hwPhysicalPortIfIndex

Impact on the System

The services configed in the closed interface will broken.

Possible Causes

ETHOAM 1ag detect ccm lost or oam fail, or the uni interface of rmep is down .

Procedure

1.Check the status of Ethoam.If the Ethoam detect ccm lost or oam fail, then resume the Ethoam alm. - If the alarm is cleared, go to Step 4. - If the alarm is not cleared, go to Step 2. 2.Check the uni interface of rmep.If the uni interface down,then resume the broken. - If the alarm is cleared, go to Step 4. - If the alarm is not cleared, go to Step 3. 3.Collect alarm information, log information and configuration information, and then contact technical support personnel. 4.End.