MEP enters LCK defect condition. (MdIndex=[MdIndex], MaIndex=[MaIndex], MdName=[MdName], MaName=[MaName], MepId=[MepId])
A MEP enterd the LCK faulty state.
| Trap Attribute | Description |
|---|---|
Alarm or Event |
Alarm |
Trap Severity |
Warning |
Mnemonic Code |
LCKDEFECT |
Trap OID |
1.3.6.1.4.1.2011.5.25.136.1.6.50 |
MIB |
HUAWEI-ETHOAM-MIB |
Alarm ID |
0x09ac201c |
Alarm Name |
hwY1731LckDefect |
Alarm Type |
communicationsAlarm |
Raise or Clear |
Raise |
Match trap |
EOAM-Y1731_1.3.6.1.4.1.2011.5.25.136.1.6.51 hwY1731LckDefectCleared |
| Parameter | Description |
|---|---|
MdIndex |
Index of an MD |
MaIndex |
Index of an MA |
MdName |
Name of an MD |
MaName |
Name of an MA |
MepId |
MEP ID |
| VB OID | VB Name | VB Index |
|---|---|---|
1.3.6.1.4.1.2011.5.25.136.1.1.3.2.1.3 |
hwDot1agCfmMdName |
hwDot1agCfmMdIndex |
1.3.6.1.4.1.2011.5.25.136.1.1.4.2.1.2 |
hwDot1agCfmMaName |
hwDot1agCfmMdIndex hwDot1agCfmMaIndex |
1.3.6.1.4.1.2011.5.25.136.1.1.5.1.1.1 |
hwDot1agCfmMepIdentifier |
hwDot1agCfmMdIndex hwDot1agCfmMaIndex hwDot1agCfmMepIdentifier |
1. Check whether the mep mep-id mep-id lck enable level level-value command is run on a MEP in an inner MA. If this command is run, check whether the specified level is the same as the level of the MD to which the MEP generating the alarm belongs.
2. Run the undo mep mep-id mep-id lck enable command to disable the Ethernet lock (ETH-LCK) function on the MEP.
3. Collect alarm information and configuration information, and then contact technical support personnel.
4. End.