TWAMP does not support services on the bound interface.(SessionId=[SessionId])
TWAMP does not support services on the bound interface.
| Trap Attribute | Description |
|---|---|
Alarm or Event |
Alarm |
Trap Severity |
Error |
Mnemonic Code |
hwTwampServiceNotSupport |
Trap OID |
1.3.6.1.4.1.2011.5.25.333.1.4.11 |
MIB |
HUAWEI-TWAMP-MIB |
Alarm ID |
0x00F10301 |
Alarm Name |
hwTwampServiceNotSupport |
Alarm Type |
qualityOfServiceAlarm |
Raise or Clear |
Raise |
Match trap |
FEI_NQA_1.3.6.1.4.1.2011.5.25.333.1.4.12 hwTwampNotSupportServiceUnderIntfRecovery |
| Parameter | Description |
|---|---|
SessionId |
Session ID. |
| VB OID | VB Name | VB Index |
|---|---|---|
1.3.6.1.4.1.2011.5.25.333.1.2.3 |
hwTwampResponderIDWithInterface |
- |
1. Check whether the type of services on the interface bound to the TWAMP reflector is VLL.
-If the type is VLL(svc mode vpws/ldp mode vpws/vss mode vpws/bgp mode vpws), go to step 3.
-If the type is not VLL, go to step 2.
2. Configure supported VLL service types on the interface bound to the TWAMP reflector.
3. Collect the alarm, log, and configuration information and contact Huawei technical support personnel.
4. End.