OAM for PW does not support the current public tunnel. (VcID=[VcID], VcType=[VcType], PeerAddr=[PeerAddr], OamType=[OamType])
OAM for PW does not support the current public tunnel.
Trap Attribute | Description |
---|---|
Alarm or Event |
Alarm |
Trap Severity |
Error |
Mnemonic Code |
hwL2vpnOamTunnelNonSupport |
Trap OID |
1.3.6.1.4.1.2011.5.25.119.9.2.41 |
MIB |
HUAWEI-L2VPN-OAM-MIB |
Alarm ID |
0x00F100a5 |
Alarm Name |
hwL2vpnOamTunnelNonSupport |
Alarm Type |
qualityOfServiceAlarm |
Raise or Clear |
Raise |
Match trap |
FEI_TPOAM_1.3.6.1.4.1.2011.5.25.119.9.2.42 hwL2vpnOamTunnelNonSupportResumed |
Parameter | Description |
---|---|
VcID |
Identifier of the layer 2 virtual circuit. |
VcType |
VC Type: 1-FR. 2-ATM_AAL5. 3-ATM_CELL_TRANSPORT. 4-VLAN. 5-ETHERNET. 6-HDLC. 7-PPP. 8-CEM. 9-ATM_CELL_VCC. 10-ATM_CELL_VPC. 11-IP_LAYER2_TRANSPORT. 12-ATM_ONE_TO_ONE_VCC_CELL_MODE. 13-ATM_ONE_TO_ONE_VPC_CELL_MODE. 14-ATM_AAL5_PDU_VCC_TRANSPORT. 15-FR_PORT. 16-CEP. 17-SAT_E1_OVER_PACKET. 18-SAT_T1_OVER_PACKET. 19-SAT_E3_OVER_PACKET. 20-SAT_T3_OVER_PACKET. 21-CESOPSN_BASIC_MODE. 22-TDMOIP_AAL1. 23-CESOPSN_TDM. 24-TDMOIP_AAL2. 25-FR_DLCI. 26-INTERWORKING. 27-VPLS. 64-IP_INTERWORKING. |
PeerAddr |
Peer IP address. |
OamType |
OAM Type: 1-MPLS OAM. 2-MPLS-TP OAM. |
VB OID | VB Name | VB Index |
---|---|---|
1.3.6.1.4.1.2011.5.25.119.9.1.3 |
hwL2vpnVcID |
- |
1.3.6.1.4.1.2011.5.25.119.9.1.4 |
hwL2vpnVcType |
- |
1.3.6.1.4.1.2011.5.25.119.9.1.5 |
hwL2vpnPeerAddr |
- |
1.3.6.1.4.1.2011.5.25.119.9.1.13 |
hwL2vpnOamType |
- |
1.Check the public tunnel type of PW.
If the tunnel type is TE, go to Step 3.
If the tunnel type is not TE, go to Step 2.
2.Change the public tunnel of PW to a TE tunnel.
If the alarm is cleared, go to Step 4.
If the alarm is not cleared, go to Step 3.
3.Collect alarm information, log information and configuration information, and then contact Huawei technical support personnel.
4.End.