The number of iFIT dynamic midegress flow reaches the upper limit. (UpperLimit=[UpperLimit])
The total number of iFIT dynamic midegress flow reaches the upper limit.
In VS mode, this trap is supported only by the admin VS.
| Trap Attribute | Description |
|---|---|
Alarm or Event |
Alarm |
Trap Severity |
Critical |
Mnemonic Code |
IFIT_DYNFLOW_MIDEGRESS_REACH_LIMIT |
Trap OID |
1.3.6.1.4.1.2011.5.25.364.2.2.1 |
MIB |
HUAWEI-IFIT-MIB |
Alarm ID |
0x0CA42002 |
Alarm Name |
IFIT_DYNFLOW_MIDEGRESS_REACH_LIMIT |
Alarm Type |
processingErrorAlarm |
Raise or Clear |
Raise |
Match trap |
IFIT_1.3.6.1.4.1.2011.5.25.364.2.2.2 hwIfitDynFlowMidEgressNumExceedResume |
| Parameter | Description |
|---|---|
UpperLimit |
iFIT total dynamic flow transit node and egress number upper limit |
| VB OID | VB Name | VB Index |
|---|---|---|
1.3.6.1.4.1.2011.5.25.364.1.4.1.1.1 |
hwIfitMaxDynFlowMidEgress |
hwIfitMaxDynFlowMidEgress |
1. Use the NMS to check whether the number of dynamic flows on the intermediate and egress nodes of the iFIT reaches the upper limit. Delete redundant dynamic flows on the iFIT intermediate and egress nodes and check whether the alarm is cleared.
2. If the alarm persists, contact Huawei technical support.