The number of L2 multicast user entries on QinQ stacking and mapping interfaces in one group has already reached the limit of each multicast group on the board. (GmpAfVersion=[GmpAfVersion], SlotName=[SlotName], VsiName=[VsiName], MulticastGroup=[MulticastGroup], MulticastSource=[MulticastSource], CurrentCount=[CurrentCount], PafValue=[PafValue])
Layer 2 multicast detected that the number of users on the QinQ stacking and mapping interfaces in the group on the board reached or exceeded the maximum number of users in a single multicast group on the board.
| Trap Attribute | Description |
|---|---|
Alarm or Event |
Event |
Trap Severity |
Warning |
Mnemonic Code |
UserPerEntryExceed |
Trap OID |
1.3.6.1.4.1.2011.5.25.181.1.34.10 |
MIB |
HUAWEI-L2MULTICAST-MIB |
Alarm ID |
This is an event trap and does not involve alarm ID. |
Alarm Name |
This is an event trap and does not involve alarm name. |
Alarm Type |
This is an event trap and does not involve alarm type. |
Raise or Clear |
This is an event trap and does not involve alarm generation or clearance. |
Match trap |
- |
| Parameter | Description |
|---|---|
GmpAfVersion |
GMP(Group Managment Protocol) address family version:
|
SlotName |
Slot name of the board. |
VsiName |
VSI name. |
MulticastGroup |
Multicast group address. |
MulticastSource |
Multicast source address. |
CurrentCount |
Current number of users. |
PafValue |
Maximum number of users in a multicast group on a board, which is defined in the PAF file. |
| VB OID | VB Name | VB Index |
|---|---|---|
1.3.6.1.4.1.2011.5.25.181.1.33.10 |
hwL2mcNotificationsAddressType |
- |
1.3.6.1.4.1.2011.5.25.181.1.33.15 |
hwL2mcNotificationsSlot |
- |
1.3.6.1.4.1.2011.5.25.181.1.33.2 |
hwL2mcNotificationsPortVsiName |
- |
1.3.6.1.4.1.2011.5.25.181.1.33.12 |
hwL2mcNotificationsExceedGroupAddress |
- |
1.3.6.1.4.1.2011.5.25.181.1.33.13 |
hwL2mcNotificationsExceedSourceAddress |
- |
1.3.6.1.4.1.2011.5.25.181.1.33.16 |
hwL2mcNotificationsExceedCurrent |
- |
1.3.6.1.4.1.2011.5.25.181.1.33.11 |
hwL2mcNotificationsExceedLimit |
- |
Layer 2 multicast detects that the number of users on the QinQ stacking and QinQ mapping interfaces in the multicast group on the board has reached or exceeded the maximum number of users in a single multicast group defined in the PAF file. This alarm is generated when a new user attempts to join the multicast group in the preceding case.