APS reported a packet lost alarm. (PwApsId=[PwApsId], PWID=[PWID], PWTYPE=[PWTYPE], PWPeerIp=[PWPeerIp], PwIndex=[PwIndex])
APS packets were lost.
| Trap Attribute | Description |
|---|---|
Alarm or Event |
Alarm |
Trap Severity |
Error |
Mnemonic Code |
hwPwApsLost |
Trap OID |
1.3.6.1.4.1.2011.5.25.119.10.2.7 |
MIB |
HUAWEI-L2VPN-PW-APS-MIB |
Alarm ID |
0x0000332e |
Alarm Name |
hwPwApsLost |
Alarm Type |
communicationsAlarm |
Raise or Clear |
Raise |
Match trap |
| Parameter | Description |
|---|---|
PwApsId |
ID of the PW APS instance |
PWID |
ID of the PW |
PWTYPE |
PW encapsulation type |
PWPeerIp |
Destination address of the PW |
PwIndex |
Interface index of the PW |
| VB OID | VB Name | VB Index |
|---|---|---|
1.3.6.1.4.1.2011.5.25.119.10.1.1.1.1 |
hwPwApsId |
hwPwApsId |
1.3.6.1.4.1.2011.5.25.119.4.1.7.1.1.4 |
hwPWInterfaceIndex |
hwPWId hwPWType hwPWPeerIp |
1. Run the display mpls l2vpn pw-aps command to check whether a PW APS instance has been configured.
2. Run the pw-aps command to configure a PW APS instance, and check whether the alarm is cleared.
3. Run the display mpls l2vc or display mpls static-l2vc command to check whether the PW is Up.
4. Perform the troubleshooting operations described in hwPWVcDown and hwSvcDown to rectify the fault.
5. Collect alarm information and configuration information, and then contact technical support personnel.
6. End.