APS reported an ID mismatch alarm. (PwApsId=[PwApsId], PWID=[PWID], PWTYPE=[PWTYPE], PWPeerIp=[PWPeerIp], PwIndex=[PwIndex])
The local and remote APS IDs of the master and backup RSGs did not match.
| Trap Attribute | Description |
|---|---|
Alarm or Event |
Alarm |
Trap Severity |
Error |
Mnemonic Code |
hwPwApsIdMismatch |
Trap OID |
1.3.6.1.4.1.2011.5.25.119.10.2.9 |
MIB |
HUAWEI-L2VPN-PW-APS-MIB |
Alarm ID |
0x0000332f |
Alarm Name |
hwPwApsIdMismatch |
Alarm Type |
communicationsAlarm |
Raise or Clear |
Raise |
Match trap |
L2VPN_1.3.6.1.4.1.2011.5.25.119.10.2.10 hwPwApsIdMismatchClear |
| Parameter | Description |
|---|---|
PwApsId |
ID of the PW APS instance |
PWID |
ID of the PW |
PWTYPE |
PW encapsulation type |
PWPeerIp |
Destination address of the PW |
PwIndex |
Interface index of the PW |
| VB OID | VB Name | VB Index |
|---|---|---|
1.3.6.1.4.1.2011.5.25.119.10.1.1.1.1 |
hwPwApsId |
hwPwApsId |
1.3.6.1.4.1.2011.5.25.119.4.1.7.1.1.4 |
hwPWInterfaceIndex |
hwPWId hwPWType hwPWPeerIp |
1. Run the display mpls l2vpn pw-aps command on the master and backup RSGs to check if their local and remote APS IDs are consistent.
2. Run the pw-aps and remote-aps aps-id command to reconfigure the APS IDs and check if the alarm is cleared.
3. Collect alarm information and configuration information, and then contact technical support personnel.
4. End.