L2VPN_1.3.6.1.4.1.2011.5.25.42.2.1.7.42 hwPwSourceTunnelNoTeCheckAlarm

Trap Buffer Description

The packets are discarded because they do not match the PW source tunnel and contain no public network labels. (PwLabel=[hwPwLabel] , PortName=[hwPortName])

Packets were dropped because they failed to pass the PW source tunnel check. These packets did not have tunnel labels.

In VS mode, this trap is supported only by the admin VS.

Trap Attributes

Trap Attribute	Description
Alarm or Event	Alarm
Trap Severity	Warning
Mnemonic Code	hwPwSourceTunnelNoTeCheckAlarm
Trap OID	1.3.6.1.4.1.2011.5.25.42.2.1.7.42
MIB	HUAWEI-L2MAM-MIB
Alarm ID	0x00F100c2
Alarm Name	hwPwSourceTunnelNoTeCheckAlarm
Alarm Type	qualityOfServiceAlarm
Raise or Clear	Raise
Match trap	L2VPN_1.3.6.1.4.1.2011.5.25.42.2.1.7.43 hwPwSourceTunnelNoTeCheckResume

Trap Buffer Parameters

Parameter	Description
hwPwLabel	PW label.
hwPortName	Port name.

VB Parameters

VB OID	VB Name	VB Index
1.3.6.1.4.1.2011.5.25.42.2.1.43.1.1	hwPwLabel	hwPwLabel hwTeLabel hwPortName
1.3.6.1.4.1.2011.5.25.42.2.1.43.1.3	hwPortName	hwPwLabel hwTeLabel hwPortName

VB OID

VB Name

VB Index

1.3.6.1.4.1.2011.5.25.42.2.1.43.1.1

hwPwLabel

hwTeLabel

hwPortName

1.3.6.1.4.1.2011.5.25.42.2.1.43.1.3

hwPortName

hwPwLabel

hwTeLabel

hwPortName

Impact on the System

The packets will be discarded

Possible Causes

The tunnel and PW labels carried in received packets did not match those on the local end.

Procedure

1.Check whether the tunnel and PW labels are configured correctly on the local end.

If they are configured correctly, go to Step 2.
If they are configured incorrectly, correct them and then go to Step 2.

2.Check whether the tunnel and PW labels are configured correctly on the remote end.

If they are configured incorrectly, go to Step 3.
If they are configured correctly, go to Step 4.

3.Collect alarm, log, and configuration information, and contact technical support personnel.

4.End.