VPLS PW HQoS services are not supported on the public network tunnel.(VsiName=[hwNotSupportTunnelVSIName], RemoteIp=[hwPWPeerRemoteIp], PwId=[hwNotSupportTunnelPwId], TunnelType=[hwNotSupportTunnelType])
VPLS PW HQoS services are not supported on the public network tunnel.
| Trap Attribute | Description |
|---|---|
Alarm or Event |
Alarm |
Trap Severity |
Warning |
Mnemonic Code |
hwVplsPwHqosNotSupportTunnelAlarm |
Trap OID |
1.3.6.1.4.1.2011.5.25.42.2.1.7.51 |
MIB |
HUAWEI-L2MAM-MIB |
Alarm ID |
0x00F10202 |
Alarm Name |
hwVplsPwHqosNotSupportTunnelAlarm |
Alarm Type |
qualityOfServiceAlarm |
Raise or Clear |
Raise |
Match trap |
L2VPN_1.3.6.1.4.1.2011.5.25.42.2.1.7.52 hwVplsPwHqosNotSupportTunnelAlarmResume |
| Parameter | Description |
|---|---|
hwNotSupportTunnelVSIName |
VSI Name. |
hwPWPeerRemoteIp |
Remote IP. |
hwNotSupportTunnelPwId |
Pw Id. |
hwNotSupportTunnelType |
Tunnel Type. |
| VB OID | VB Name | VB Index |
|---|---|---|
1.3.6.1.4.1.2011.5.25.42.2.1.46.1.3 |
hwNotSupportTunnelVSIName |
hwNotSupportTunnelPwId hwPWPeerRemoteIp |
1.3.6.1.4.1.2011.5.25.42.2.1.46.1.2 |
hwPWPeerRemoteIp |
hwNotSupportTunnelPwId hwPWPeerRemoteIp |
1.3.6.1.4.1.2011.5.25.42.2.1.46.1.1 |
hwNotSupportTunnelPwId |
hwNotSupportTunnelPwId hwPWPeerRemoteIp |
1.3.6.1.4.1.2011.5.25.42.2.1.47 |
hwNotSupportTunnelType |
- |
1.Locate the VSI based on the VSI name in the alarm. Run the display this command in the VSI view to check the bound tunnel policy. In the tunnel policy view, run the tunnel select-seq lsp load-balance-number command to change the GRE tunnel to another type of tunnel.Then check whether the alarm is cleared.
2.Collect the trap information, log information, and configuration information, and then contact technical support personnel.
3.End.