The number of LDP label mapping sent or received on the device exceeded the upper limit. (Type=[Type], VPN name=[VrfName], MappingTotalCount=[MappingTotalCount])
When the number of LDP labels in the system exceeds the upper limit, an alarm is generated, indicating that the number of labels received or sent by the system exceeds the upper limit. In this case, you need to limit the number of labels to prevent services from being affected.
In VS mode, this trap is supported only by the admin VS.
| Trap Attribute | Description |
|---|---|
Alarm or Event |
Alarm |
Trap Severity |
Warning |
Mnemonic Code |
hwMplsLdpMappingCountExceed |
Trap OID |
1.3.6.1.4.1.2011.5.25.143.2.9 |
MIB |
HUAWEI-MPLSLDP-MIB |
Alarm ID |
0x00f103bf |
Alarm Name |
hwMplsLdpMappingCountExceed |
Alarm Type |
qualityOfServiceAlarm |
Raise or Clear |
Raise |
Match trap |
LDP_1.3.6.1.4.1.2011.5.25.143.2.10 hwMplsLdpMappingCountExceedClear |
| Parameter | Description |
|---|---|
Type |
Label type |
VrfName |
VRF name |
MappingTotalCount |
Total number of LDP labels supported by the system |
| VB OID | VB Name | VB Index |
|---|---|---|
1.3.6.1.4.1.2011.5.25.143.1.76.1.1 |
hwLdpMappingType |
hwLdpMappingType hwLdpVrfIndex |
1.3.6.1.4.1.2011.5.25.143.1.76.1.2 |
hwLdpVrfIndex |
hwLdpMappingType hwLdpVrfIndex |
1.3.6.1.4.1.2011.5.25.143.1.76.1.3 |
hwLdpMappingTotalCount |
hwLdpMappingType hwLdpVrfIndex |
1. Run commands such as lsp-trigger, mpls ldp outbound/inbound, and mpls ldp propagate mapping to suppress the receiving of unnecessary labels, preventing services from being affected.
2. Collect alarm and configuration information, and contact technical support personnel.
3. End.