MPLS_LSPM_1.3.6.1.4.1.2011.5.25.121.2.1.10 hwMplsTunnelHSBResume

Trap Buffer Description

Main LSP of Tunnel resumes from backup LSP in HSB. (TunnelId=[TunnelId], LocalLspId=[LocalLspId], IngressLsrId=[IngressLsrId], EgressLsrId=[EgressLsrId], TunnelAdminStatus=[TunnelAdminStatus], TunnelOperStatus=[TunnelOperStatus])

Traffic switched from the hot-standby CR-LSP to the primary CR-LSP after the primary CR-LSP recovered.

Trap Attributes

Trap Attribute Description

Alarm or Event

Event

Trap Severity

Warning

Mnemonic Code

TNLHSBRESUME

Trap OID

1.3.6.1.4.1.2011.5.25.121.2.1.10

MIB

HUAWEI-MPLS-EXTEND-MIB

Alarm ID

This is an event trap and does not involve alarm ID.

Alarm Name

This is an event trap and does not involve alarm name.

Alarm Type

This is an event trap and does not involve alarm type.

Raise or Clear

This is an event trap and does not involve alarm generation or clearance.

Match trap

-

Trap Buffer Parameters

Parameter Description

TunnelId

Primary tunnel ID.

LocalLspId

LSP ID of the primary tunnel.

IngressLsrId

Ingress LSR ID of the primary tunnel.

EgressLsrId

Egress LSR ID of the primary tunnel.

TunnelAdminStatus

Indicates the management status of the tunnel.

TunnelOperStatus

Indicates the operating status of the tunnel.

VB Parameters

VB OID VB Name VB Index

1.3.6.1.4.1.2011.5.25.121.1.1.1.7

hwMplsTunnelAdminStatus

hwMplsTunnelIndex

hwMplsTunnelInstance

hwMplsTunnelIngressLSRId

hwMplsTunnelEgressLSRId

1.3.6.1.4.1.2011.5.25.121.1.1.1.8

hwMplsTunnelOperStatus

hwMplsTunnelIndex

hwMplsTunnelInstance

hwMplsTunnelIngressLSRId

hwMplsTunnelEgressLSRId

Impact on the System

Services will not be affected.

Possible Causes

Traffic travels through a hot-standby CR-LSP and the primary CR-LSP recovers.

Procedure

1. This log information is informational only, and no action is required.
Copyright © Huawei Technologies Co., Ltd.
Copyright © Huawei Technologies Co., Ltd.
< Previous topic Next topic >