MPLS_LSPM_1.3.6.1.4.1.2011.5.25.121.2.1.30 hwMplsOamPeriod

Trap Buffer Description

The tunnel receives a period inconsistency alarm. (SessionTunnelId=[SessionTunnelId], LocalLspId=[LocalLspId], IngressLsrId=[IngressLsrId], EgressLsrId=[EgressLsrId], TunnelName=[TunnelName], SignalingProtocol=[SgnlPrtcl], SignalledTunnelName=[SignalledTunnelName])

CC detection periods on two ends of an MPLS tunnel were different.

Trap Attributes

Trap Attribute	Description
Alarm or Event	Alarm
Trap Severity	Critical
Mnemonic Code	hwMplsOamPeriod
Trap OID	1.3.6.1.4.1.2011.5.25.121.2.1.30
MIB	HUAWEI-MPLS-EXTEND-MIB
Alarm ID	0x0001005f
Alarm Name	hwMplsOamPeriod
Alarm Type	communicationsAlarm
Raise or Clear	Raise
Match trap	MPLS_LSPM_1.3.6.1.4.1.2011.5.25.121.2.1.31 hwMplsOamPeriodRecovery

Trap Buffer Parameters

Parameter	Description
SessionTunnelId	Tunnel ID
LocalLspId	Local LSP ID
IngressLsrId	ID of the ingress LSR
EgressLsrId	ID of the egress LSR
TunnelName	Tunnel name
SgnlPrtcl	Tunneling protocol
SignalledTunnelName	Tunnel alias.

VB Parameters

VB OID	VB Name	VB Index
1.3.6.1.4.1.2011.5.25.121.1.1.1.29	hwMplsTunnelInterfaceName	hwMplsTunnelIndex hwMplsTunnelInstance hwMplsTunnelIngressLSRId hwMplsTunnelEgressLSRId
1.3.6.1.4.1.2011.5.25.121.1.1.1.30	hwMplsTunnelSignalProto	hwMplsTunnelIndex hwMplsTunnelInstance hwMplsTunnelIngressLSRId hwMplsTunnelEgressLSRId
1.3.6.1.4.1.2011.5.25.121.1.1.1.33	hwMplsTunnelSignalledTunnelName	hwMplsTunnelIndex hwMplsTunnelInstance hwMplsTunnelIngressLSRId hwMplsTunnelEgressLSRId

VB OID

VB Name

VB Index

1.3.6.1.4.1.2011.5.25.121.1.1.1.29

hwMplsTunnelInterfaceName

hwMplsTunnelIndex

hwMplsTunnelInstance

hwMplsTunnelIngressLSRId

hwMplsTunnelEgressLSRId

1.3.6.1.4.1.2011.5.25.121.1.1.1.30

hwMplsTunnelSignalProto

hwMplsTunnelIndex

hwMplsTunnelInstance

hwMplsTunnelIngressLSRId

hwMplsTunnelEgressLSRId

1.3.6.1.4.1.2011.5.25.121.1.1.1.33

hwMplsTunnelSignalledTunnelName

hwMplsTunnelIndex

hwMplsTunnelInstance

hwMplsTunnelIngressLSRId

hwMplsTunnelEgressLSRId

Impact on the System

This alarm affects the ME status, triggers a CC alarm, and triggers a primary/backup LSP switchover.

Possible Causes

The CC detection period of the local end is different from that of the peer end.

Procedure

1. Run the display current-configuration command to check whether the CC detection periods of the local and peer ends are the same.

If so, go to Step 3.
If not, go to Step 2.

2. Configure a same CC detection period for the local and peer ends.

Then check whether MPLS_LSPM_1.3.6.1.4.1.2011.5.25.121.2.1.31 hwMplsOamPeriodRecovery is reported.
If so, go to Step 4.
If not, go to Step 3.

3. Collect the trap information, log information, and configuration information, and then Collect alarm information and configuration information, and then contact technical support personnel..

4. End.