P2MP tunnel status changes to down.(SessionTunnelId=[SessionTunnelId], LocalLspId=[LocalLspId], IngressLsrId=[IngressLsrId], P2mpId=[P2mpId], TunnelName=[TunnelName], Reason=[DownReason])
A P2MP tunnel went Down.
| Trap Attribute | Description |
|---|---|
Alarm or Event |
Alarm |
Trap Severity |
Critical |
Mnemonic Code |
hwP2mpTeTunnelDown |
Trap OID |
1.3.6.1.4.1.2011.5.25.121.2.1.89 |
MIB |
HUAWEI-MPLS-EXTEND-MIB |
Alarm ID |
0x00F10265 |
Alarm Name |
hwP2mpTeTunnelDown |
Alarm Type |
communicationsAlarm |
Raise or Clear |
Raise |
Match trap |
MPLS_LSPM_1.3.6.1.4.1.2011.5.25.121.2.1.90 hwP2mpTeTunnelDownClear |
| Parameter | Description |
|---|---|
SessionTunnelId |
Tunnel Id |
LocalLspId |
Local Lsp Id |
IngressLsrId |
Ingress Lsr Id |
P2mpId |
P2MP Id |
TunnelName |
Tunnel Name |
DownReason |
Alarm reason. Range: (10, 30, 100) - 10: Tunnel Shutdown - 30: All Sub Lsp Down - 100: Alarm Clear |
| VB OID | VB Name | VB Index |
|---|---|---|
1.3.6.1.4.1.2011.5.25.121.1.1.1.29 |
hwMplsTunnelInterfaceName |
hwMplsTunnelIndex hwMplsTunnelInstance hwMplsTunnelIngressLSRId hwMplsTunnelEgressLSRId |
1.3.6.1.4.1.2011.5.25.121.2.2.20 |
hwMplsP2mpId |
- |
1.3.6.1.4.1.2011.5.25.121.2.2.3 |
hwMplsTunnelDownReason |
- |
1. Run the undo shutdown command on the tunnel interface view. - If the fault is rectified, go to Step 3. - If the fault persists, go to Step 2. 2. Collect log information and configuration information, and then contact technical support personnel. 3. End.
The same as Cause 10.