The number of used MPLS resources on the interface board reached the maximum number. (hwMplsResourceType=[ResourceType], hwMplsChassis=[Chassis], hwMplsSlot=[Slot], hwMplsResourceTotalCount=[ResourceTotalCount])
The number of MPLS resources on the interface board reached the maximum value.
In VS mode, this trap is supported only by the admin VS.
| Trap Attribute | Description |
|---|---|
Alarm or Event |
Alarm |
Trap Severity |
Critical |
Mnemonic Code |
hwMplsSlotResTotalCountExceed |
Trap OID |
1.3.6.1.4.1.2011.5.25.121.2.1.98 |
MIB |
HUAWEI-MPLS-EXTEND-MIB |
Alarm ID |
0x00f10434 |
Alarm Name |
hwMplsSlotResTotalCountExceed |
Alarm Type |
qualityOfServiceAlarm |
Raise or Clear |
Raise |
Match trap |
MPLS_LSPM_1.3.6.1.4.1.2011.5.25.121.2.1.99 hwMplsSlotResTotalCountExceedClear |
| Parameter | Description |
|---|---|
ResourceType |
Resource type |
Chassis |
Number of the chassis where the interface board is located |
Slot |
Slot number of the interface board |
ResourceTotalCount |
Maximum number of resources supported by an interface board |
| VB OID | VB Name | VB Index |
|---|---|---|
1.3.6.1.4.1.2011.5.25.121.2.2.11 |
hwMplsResourceType |
- |
1.3.6.1.4.1.2011.5.25.121.2.2.24 |
hwMplsChassis |
- |
1.3.6.1.4.1.2011.5.25.121.2.2.23 |
hwMplsSlot |
- |
1.3.6.1.4.1.2011.5.25.121.2.2.14 |
hwMplsResourceTotalCount |
- |
1. Based on the MPLS resource type, check whether the resource usage exceeds the threshold.
2. Reduce the configurations or messages that trigger the creation of related resources to reduce the usage of MPLS resources of the corresponding type. Then, check whether the alarm is cleared.
3. Collect alarm and configuration information, and contact technical support personnel.
4. End