MPLS_RSVP_1.3.6.1.4.1.2011.5.25.148.1.12.2.1 hwRsvpTeHelloLost

Trap Buffer Description

The RSVP Hello neighbor is lost. (IpAddress=[ipaddr])

The RSVP neighbor relationship was interrupted.

Trap Attributes

Trap Attribute Description

Alarm or Event

Alarm

Trap Severity

Critical

Mnemonic Code

GSP_RSVP_NB_DOWN

Trap OID

1.3.6.1.4.1.2011.5.25.148.1.12.2.1

MIB

HUAWEI-RSVPTE-MIB

Alarm ID

0x00F10037

Alarm Name

hwRsvpTeHelloLost

Alarm Type

communicationsAlarm

Raise or Clear

Raise

Match trap

MPLS_RSVP_1.3.6.1.4.1.2011.5.25.148.1.12.2.2 hwRsvpTeHelloLostRecovery

Trap Buffer Parameters

Parameter Description

ipaddr

Indicates the address of the RSVP neighbor.

VB Parameters

VB OID VB Name VB Index

1.3.6.1.4.1.2011.5.25.148.1.12.1.1

hwRsvpTeNbr

-

Impact on the System

If GR has been enabled, services will not be affected.

If GR has not been enabled, the LSP goes Down or a master/slave LSP switchover is performed using FRR.

Possible Causes

The RSVP neighbor or the link over which the RSVP neighbor relationship is established became faulty.

Procedure

1. Check whether the physical link or the RSVP neighbor is faulty.

  • If so, repair the physical link or restart the RSVP neighbor.
  • If not, go to step 2.

2. Run the display ip routing-table command to check whether there is a route to the RSVP neighbor.

  • If so, go to step 3.
  • If not, configure an IGP to advertise routes.

3. Collect alarm information and configuration information, and then contact technical support personnel.

4. End.

Copyright © Huawei Technologies Co., Ltd.
Copyright © Huawei Technologies Co., Ltd.
Next topic >