The port has been set to discarding state. (InstanceID=[InstanceID], PortIndex=[PortIndex], IfIndex=[IfIndex], PortName=[PortName], PwName=[PwName])
Specify that the status of the port STP becomes Discarding
| Trap Attribute | Description |
|---|---|
Alarm or Event |
Event |
Trap Severity |
Warning |
Mnemonic Code |
PORT_STATE_DISCARDING |
Trap OID |
1.3.6.1.4.1.2011.5.25.42.4.2.2 |
MIB |
HUAWEI-MSTP-MIB |
Alarm ID |
This is an event trap and does not involve alarm ID. |
Alarm Name |
This is an event trap and does not involve alarm name. |
Alarm Type |
This is an event trap and does not involve alarm type. |
Raise or Clear |
This is an event trap and does not involve alarm generation or clearance. |
Match trap |
- |
| Parameter | Description |
|---|---|
InstanceID |
Indicates the instance ID. |
PortIndex |
MSTP port index. |
IfIndex |
Indicates the interface index. |
PortName |
Indicates the port name. |
PwName |
Indicates the PW name. |
| VB OID | VB Name | VB Index |
|---|---|---|
1.3.6.1.4.1.2011.5.25.42.4.1.19.1.1 |
hwMstpInstanceID |
hwMstpInstanceID |
1.3.6.1.4.1.2011.5.25.42.4.1.20.1.1 |
hwMstpiPortIndex |
hwMstpInstanceID hwMstpiPortIndex |
1.3.6.1.2.1.31.1.1.1.1 |
ifName |
ifIndex |
1.3.6.1.4.1.2011.5.25.42.4.1.33 |
hwMstpPwName |
- |
1. View physical devices on the network to check whether a new physical link that has STP enabled is added.
2. Check whether the added physical link is necessary.
3. Run the display stp [ process process-id ] [ instance instance-id ] [ interface interface-type interface-number | slot slot-id | vsi vsi-name pw pw-name ] [ brief ] command to check whether the interfaces are consistent with the STP calculation results.
4. Correctly deploy the network topology, and then check whether the alarm is cleared. If the alarm persists, go to Step 5.
5. Collect alarm information and configuration information, and then contact technical support personnel.