NAT_1.3.6.1.4.1.2011.5.25.240.2.82 hwCGNServerMapNumThresholdAlarm
Trap Buffer Description
The usage of server-map table reached the threshold. (Usage=[Usage], Threshold=[Threshold], Slot=[Slot], Cpu=[Cpu])
Server-map entry usage reached a specified threshold.
In VS mode, this trap is supported only by the admin VS.
Trap Attributes
| Trap Attribute | Description |
|---|---|
Alarm or Event |
Alarm |
Trap Severity |
Warning |
Mnemonic Code |
hwCGNServerMapNumThresholdAlarm |
Trap OID |
1.3.6.1.4.1.2011.5.25.240.2.82 |
MIB |
HUAWEI-DSLITE-MIB |
Alarm ID |
0x00F101c6 |
Alarm Name |
hwCGNServerMapNumThresholdAlarm |
Alarm Type |
communicationsAlarm |
Raise or Clear |
Raise |
Match trap |
NAT_1.3.6.1.4.1.2011.5.25.240.2.83 hwCGNServerMapNumThresholdResumeAlarm |
Trap Buffer Parameters
| Parameter | Description |
|---|---|
Usage |
Server-map entry usage. |
Threshold |
Threshold of the proportion of assigned public IP addresses in a specified no-PAT address pool to the total supported ones. |
Slot |
Slot ID of a service board. |
Cpu |
CPU ID of the service board. |
VB Parameters
| VB OID | VB Name | VB Index |
|---|---|---|
1.3.6.1.4.1.2011.5.25.240.1.2.29 |
hwCGNAlarmServerMapUsage |
- |
1.3.6.1.4.1.2011.5.25.240.1.2.8 |
hwVSUAlarmThreshold |
- |
1.3.6.1.4.1.2011.5.25.240.1.2.28 |
hwVSUAlarmBoardName |
- |
1.3.6.1.4.1.2011.5.25.240.1.2.11 |
hwVSUAlarmCpu |
- |
Procedure
1.Disable ALG functions in an instance to reduce the number of used server-map entries to 87.5% of the "threshold". Check whether the trap is cleared.
- If the trap is cleared, go to Step 3.
- If the trap persists, go to Step 2.
2.Collect trap, log, and configuration information, and contact technical support personnel.
3.End.