NHRP_1.3.6.1.4.1.2011.6.122.73.0.2.7 hwNHRPDynPeerThresholdExceedAlarm

Trap Buffer Description

The number of NHRP dynamic peers reached the alarm threshold. (DynamicThreshold=[NhrpDynThrhold], CurrentNumber=[NhrpDynPeerNumber])

The number of NHRP dynamic peers reached the alarm threshold.

Trap Attributes

Trap Attribute	Description
Alarm or Event	Alarm
Trap Severity	Warning
Mnemonic Code	hwNhrpDynamicPeerNumberTrap
Trap OID	1.3.6.1.4.1.2011.6.122.73.0.2.7
MIB	HUAWEI-SECURITY-NHRP-MIB
Alarm ID	0x00F10248
Alarm Name	hwNHRPDynPeerThresholdExceedAlarm
Alarm Type	communicationsAlarm
Raise or Clear	Raise
Match trap	NHRP_1.3.6.1.4.1.2011.6.122.73.0.2.8 hwNHRPDynPeerThresholdExceedResume

Trap Buffer Parameters

Parameter	Description
NhrpDynThrhold	Threshold of dynamic NHRP entries
NhrpDynPeerNumber	Number of dynamic NHRP entries

VB Parameters

VB OID	VB Name	VB Index
1.3.6.1.4.1.2011.6.122.73.0.1.10	hwNHRPDynPeerThrehold	-
1.3.6.1.4.1.2011.6.122.73.0.1.11	hwNHRPDynPeerCnt	-

Impact on the System

A tunnel cannot be established between Spoke nodes.

Possible Causes

The number of dynamic NHRP peers exceeded the alarm threshold.

Procedure

1. Check the alarm information and whether the NhrpDynThrhold field is set properly. The alarm information contains the NhrpDynThrhold and NhrpDynPeerNumber fields, which indicate the current threshold and current number of NHRP dynamic peers, respectively.

If the field is set properly, go to Step 3.
If the field is not set properly, go to Step 2.

2. Run the nhrp capacity warning-threshold command to set a new threshold and check whether the alarm is cleared.

If the alarm is cleared, go to Step 5.
If the alarm persists, go to Step 3.

3. Run the reset nhrp peer command to delete the unwanted dynamic tunnels and check whether the alarm is cleared.

If the alarm is cleared, go to Step 5.
If the alarm persists, go to Step 4.

4. Collect trap, log, and configuration information, and contact Huawei technical support personnel.

5. End.