NHRP_1.3.6.1.4.1.2011.6.122.73.0.2.9 hwNHRPLocalPeerLimitReachAlarm

Trap Buffer Description

The number of NHRP local peers reached the alarm limit. (LimitValue=[NhrpLocalPeerLimit], CurrentNumber=[NhrpLocalPeerNumber])

The number of local NHRP entries reached the specification.

Trap Attributes

Trap Attribute	Description
Alarm or Event	Alarm
Trap Severity	Warning
Mnemonic Code	hwNhrpLocalPeerNumberTrap
Trap OID	1.3.6.1.4.1.2011.6.122.73.0.2.9
MIB	HUAWEI-SECURITY-NHRP-MIB
Alarm ID	0x00F10268
Alarm Name	hwNHRPLocalPeerLimitReachAlarm
Alarm Type	communicationsAlarm
Raise or Clear	Raise
Match trap	NHRP_1.3.6.1.4.1.2011.6.122.73.0.2.10 hwNHRPLocalPeerLimitResume

Trap Buffer Parameters

Parameter	Description
NhrpLocalPeerLimit	Threshold of local NHRP entries
NhrpLocalPeerNumber	Number of local NHRP entries

VB Parameters

VB OID	VB Name	VB Index
1.3.6.1.4.1.2011.6.122.73.0.1.12	hwNHRPLocalPeerLimit	-
1.3.6.1.4.1.2011.6.122.73.0.1.13	hwNHRPLocalPeerCnt	-

Impact on the System

A tunnel cannot be established between Spoke nodes.

Possible Causes

The number of local NHRP entries exceeded the specification.

Procedure

1. Check the alarm information and whether the hwNHRPLocalPeerLimit field is set properly. The alarm information contains the hwNHRPLocalPeerLimit and hwNHRPLocalPeerCnt fields, which indicates the current threshold and number of local entries, respectively.

If the threshold is set properly, go to Step 3.
If the threshold is not set properly, go to Step 2.

2. Run the nhrp capacity warning-threshold command to set a new threshold and check whether the alarm is cleared.

If the alarm is cleared, go to Step 5.
If the alarm persists, go to Step 3.

3. Run the reset nhrp peer command to delete the unwanted dynamic tunnels and check whether the alarm is cleared.

If the alarm is cleared, go to Step 5.
If the alarm persists, go to Step 4.

4. Collect trap, log, and configuration information, and contact Huawei technical support personnel.

5. End.