The OWD-SD of the NQA entry exceeded the configured threshold. (OwnerIndex=[OwnerIndex], TestName=[TestName], TargetAddressType=[TargetAddressType], TargetAddress=[TargetAddress], Threshold=[Threshold], Index=[Index], RttMax=[RttMax], MaxDelaySD=[MaxDelaySD], MaxDelayDS=[MaxDelayDS], OWDOverThresholdsSD=[OWDOverThresholdsSD])
Indicates that the period of a test exceeded the set threshold. The threshold could be set by the user. The threshold owd-sd command could modify the threshold.
| Trap Attribute | Description |
|---|---|
Alarm or Event |
Event |
Trap Severity |
Warning |
Mnemonic Code |
NQA_JITTER_OWD_THRESHOLD_SD |
Trap OID |
1.3.6.1.4.1.2011.5.25.111.6.17 |
MIB |
NQA-MIB |
Alarm ID |
This is an event trap and does not involve alarm ID. |
Alarm Name |
This is an event trap and does not involve alarm name. |
Alarm Type |
This is an event trap and does not involve alarm type. |
Raise or Clear |
This is an event trap and does not involve alarm generation or clearance. |
Match trap |
- |
| Parameter | Description |
|---|---|
OwnerIndex |
Indicates the administrator of an NQA test instance. |
TestName |
Indicates the name of an NQA test instance. |
TargetAddressType |
Indicates the destination address type of an NQA test instance. |
TargetAddress |
Indicates the destination address of an NQA test instance. |
Threshold |
Indicates the user-defined threshold of an NQA test instance. |
Index |
Indicates the index of the result table. |
RttMax |
Indicates the maximum RTT value of an NQA test instance. |
MaxDelaySD |
Indicates the maximum OWD from the source to the destination. |
MaxDelayDS |
Indicates the maximum OWD from the destination to the source. |
OWDOverThresholdsSD |
Indicates the number of times that the OWD from the source to the destination exceeds the threshold. |
| VB OID | VB Name | VB Index |
|---|---|---|
1.3.6.1.4.1.2011.5.25.111.2.2.1.1 |
nqaAdminParaTargetAddressType |
nqaAdminCtrlOwnerIndex nqaAdminCtrlTestName |
1.3.6.1.4.1.2011.5.25.111.2.2.1.2 |
nqaAdminParaTargetAddress |
nqaAdminCtrlOwnerIndex nqaAdminCtrlTestName |
1.3.6.1.4.1.2011.5.25.111.2.1.1.8 |
nqaAdminCtrlThreshold2 |
nqaAdminCtrlOwnerIndex nqaAdminCtrlTestName |
1.3.6.1.4.1.2011.5.25.111.4.3.1.9 |
nqaJitterStatsRTTMax |
nqaAdminCtrlOwnerIndex nqaAdminCtrlTestName nqaJitterStatsIndex |
1.3.6.1.4.1.2011.5.25.111.4.3.1.44 |
nqaJitterStatsMaxDelaySD |
nqaAdminCtrlOwnerIndex nqaAdminCtrlTestName nqaJitterStatsIndex |
1.3.6.1.4.1.2011.5.25.111.4.3.1.45 |
nqaJitterStatsMaxDelayDS |
nqaAdminCtrlOwnerIndex nqaAdminCtrlTestName nqaJitterStatsIndex |
1.3.6.1.4.1.2011.5.25.111.4.3.1.53 |
nqaJitterStatsOWDOverThresholdsSD |
nqaAdminCtrlOwnerIndex nqaAdminCtrlTestName nqaJitterStatsIndex |
1. Run the display cpu-usage command in the system view to check whether the CPU is overloaded.
2. Run the display this command in the NQA test view to obtain the current threshold, and then run the threshold owd-sd command in the NQA test view to change the threshold as required. The recommended threshold is 20 ms. Restart the test instance and check whether the alarm is cleared.
3. Collect alarm and configuration information, and contact technical support personnel.
4. The procedure ends.