NQA_1.3.6.1.4.1.2011.5.25.111.6.1 nqaResultsProbeFailed

Trap Buffer Description

NQA entry probe failed. (OwnerIndex=[OwnerIndex], TestName=[TestName], TargetAddressType=[TargetAddressType], TargetAddress=[TargetAddress], OperStatus=[OperStatus], Index=[Index], HopIndex=[HopIndex], AddressType=[AddressType], Address=[Address], CompletionTimeMin=[CompletionTimeMin], CompletionTimeMax=[CompletionTimeMax], SumCompletionTime=[SumCompletionTime], ProbeResponses=[ProbeResponses], SentProbes=[SentProbes], SumCompletionTime2Low=[SumCompletionTime2Low], SumCompletionTime2High=[SumCompletionTime2High], LastGoodProbe=[LastGoodProbe], LastGoodPath=[LastGoodPath])

The number of consecutive probe failures reached the configured upper threshold.

Trap Attributes

Trap Attribute	Description
Alarm or Event	Event
Trap Severity	Warning
Mnemonic Code	PROBE_FAILED
Trap OID	1.3.6.1.4.1.2011.5.25.111.6.1
MIB	NQA-MIB
Alarm ID	This is an event trap and does not involve alarm ID.
Alarm Name	This is an event trap and does not involve alarm name.
Alarm Type	This is an event trap and does not involve alarm type.
Raise or Clear	This is an event trap and does not involve alarm generation or clearance.
Match trap	-

Trap Buffer Parameters

Parameter	Description
OwnerIndex	Administrator of an NQA test instance.
TestName	Name of an NQA test instance.
TargetAddressType	Destination address type of an NQA test instance.
TargetAddress	Destination address of an NQA test instance.
OperStatus	Status of an NQA test instance.
Index	Index of the result table.
HopIndex	Hop index.
AddressType	Address type of an NQA test instance.
Address	Address of an NQA test instance.
CompletionTimeMin	Minimum RTT value of an NQA test instance.
CompletionTimeMax	Maximum RTT value of an NQA test instance.
SumCompletionTime	RTT sum of an NQA test instance.
ProbeResponses	Statistics on received packets.
SentProbes	Statistics on sent packets.
SumCompletionTime2Low	Sum of RTT squared right 32 bits.
SumCompletionTime2High	Sum of RTT squared left 32 bits.
LastGoodProbe	Time when the latest returned packet is received.
LastGoodPath	Time when the last complete path is obtained.

VB Parameters

VB OID	VB Name	VB Index
1.3.6.1.4.1.2011.5.25.111.2.2.1.1	nqaAdminParaTargetAddressType	nqaAdminCtrlOwnerIndex nqaAdminCtrlTestName
1.3.6.1.4.1.2011.5.25.111.2.2.1.2	nqaAdminParaTargetAddress	nqaAdminCtrlOwnerIndex nqaAdminCtrlTestName
1.3.6.1.4.1.2011.5.25.111.2.3.1.9	nqaScheduleOperStatus	nqaAdminCtrlOwnerIndex nqaAdminCtrlTestName
1.3.6.1.4.1.2011.5.25.111.4.1.1.19	nqaResultsAddressType	nqaAdminCtrlOwnerIndex nqaAdminCtrlTestName nqaResultsIndex nqaResultsHopIndex
1.3.6.1.4.1.2011.5.25.111.4.1.1.20	nqaResultsAddress	nqaAdminCtrlOwnerIndex nqaAdminCtrlTestName nqaResultsIndex nqaResultsHopIndex
1.3.6.1.4.1.2011.5.25.111.4.1.1.11	nqaResultsCompletionTimeMin	nqaAdminCtrlOwnerIndex nqaAdminCtrlTestName nqaResultsIndex nqaResultsHopIndex
1.3.6.1.4.1.2011.5.25.111.4.1.1.12	nqaResultsCompletionTimeMax	nqaAdminCtrlOwnerIndex nqaAdminCtrlTestName nqaResultsIndex nqaResultsHopIndex
1.3.6.1.4.1.2011.5.25.111.4.1.1.8	nqaResultsSumCompletionTime	nqaAdminCtrlOwnerIndex nqaAdminCtrlTestName nqaResultsIndex nqaResultsHopIndex
1.3.6.1.4.1.2011.5.25.111.4.1.1.21	nqaResultsProbeResponses	nqaAdminCtrlOwnerIndex nqaAdminCtrlTestName nqaResultsIndex nqaResultsHopIndex
1.3.6.1.4.1.2011.5.25.111.4.1.1.22	nqaResultsSentProbes	nqaAdminCtrlOwnerIndex nqaAdminCtrlTestName nqaResultsIndex nqaResultsHopIndex
1.3.6.1.4.1.2011.5.25.111.4.1.1.9	nqaResultsSumCompletionTime2Low	nqaAdminCtrlOwnerIndex nqaAdminCtrlTestName nqaResultsIndex nqaResultsHopIndex
1.3.6.1.4.1.2011.5.25.111.4.1.1.10	nqaResultsSumCompletionTime2High	nqaAdminCtrlOwnerIndex nqaAdminCtrlTestName nqaResultsIndex nqaResultsHopIndex
1.3.6.1.4.1.2011.5.25.111.4.1.1.23	nqaResultsLastGoodProbe	nqaAdminCtrlOwnerIndex nqaAdminCtrlTestName nqaResultsIndex nqaResultsHopIndex
1.3.6.1.4.1.2011.5.25.111.4.1.1.24	nqaResultsLastGoodPath	nqaAdminCtrlOwnerIndex nqaAdminCtrlTestName nqaResultsIndex nqaResultsHopIndex

Impact on the System

The system will net be affected.

Possible Causes

Cause 1: The destination address was inexistent and unreachable.

Cause 2: The destination address exists, but the route was unreachable.

Cause 3: Because of the network latency, the Rtt of the packet was longer than the set timeout period.

Procedure

1. Run the display this command in the NQA test view to check whether the destination address is correctly configured.

If the parameters are correctly configured, go to Step 2.
If the destination address is incorrect, run the destination-address command in the NQA test view to change the destination address.Restart the test instance and check whether the alarm is cleared.
If yes, go to Step 5.
If not, go to Step 2.

2. Run the ping command in the NQA test instance view to check whether the route is reachable.

If the route is reachable, go to Step 3.
If the route is unreachable, run the display ip routing-table command to check the routing table and rectify the route fault.Restart the test instance and check whether the alarm is cleared.
If yes, go to Step 5.
If not, go to Step 3.

3. Run the timeout command in the NQA test instance view to change the timeout period based on network conditions. You are advised to set the timeout period to the default value, 3 seconds. The value ranges from 1 to 60 seconds. (You can run the display this command in the NQA test instance view to view the current timeout period.)Restart the test instance and check whether the alarm is cleared.

If yes, go to Step 5.
If not, go to Step 4.

4. Collect alarm and configuration information, and contact technical support personnel.

5. End