OSPF_1.3.6.1.4.1.2011.5.25.155.31.15 hwOspfv2LsdbApproachingOverflow

Trap Buffer Description

The number of AS-external LSAs in the LSDB of an OSPF process is approaching the configured maximum number.(hwOspfv2ProcessIdIndex=[hwOspfv2ProcessIdIndex], hwOspfv2Threshold=[hwOspfv2Threshold])

The number of external routes in the OSPF LSDB reached or exceeded 90% of the maximum number.

Trap Attributes

Trap Attribute	Description
Alarm or Event	Alarm
Trap Severity	Error
Mnemonic Code	ospfLsdbApproachOverflow
Trap OID	1.3.6.1.4.1.2011.5.25.155.31.15
MIB	HUAWEI-OSPFV2-MIB
Alarm ID	0x00F100df
Alarm Name	ospfLsdbApproachOverflow
Alarm Type	qualityOfServiceAlarm
Raise or Clear	Raise
Match trap	OSPF_1.3.6.1.4.1.2011.5.25.155.31.16 hwOspfv2LsdbApproachingOverflowClear

Trap Buffer Parameters

Parameter	Description
hwOspfv2ProcessIdIndex	Indicates the OSPF process ID.
hwOspfv2Threshold	Indicates 90% of the maximum number of external routes allowed in the OSPF LSDB.

VB Parameters

VB OID	VB Name	VB Index
1.3.6.1.4.1.2011.5.25.155.3.1.1	hwOspfv2ProcessIdIndex	hwOspfv2ProcessIdIndex

Procedure

1. Run the display ospf brief command. If OSPF is in LSDB overflow status is displayed in the command output, the OSPF LSDB in the current OSPF process is overloaded. If OSPF LSDB is approaching overflow limit is displayed in the command output, the number of external routes in the OSPF LSDB has reached or exceeded 90% of the maximum number.

If the OSPF LSDB is overloaded, go to Step 2.
If the OSPF LSDB is not overloaded, this log message is informational only and no action is required.

2. Perform the following operations as required:

If a change in the maximum number is allowed, run the lsdb-overflow-limit number command to increase it.
If a change in the maximum number is not allowed, go to Step 3.

3. Contact technical support personnel.

4. End.