PIC_1.3.6.1.4.1.2011.5.25.157.2.157.7 hwPhysicalPortBip8SdError

Trap Buffer Description

BIP8 SD alarm. (hwPhysicalPortIfIndex=[hwPhysicalPortIfIndex],hwPhysicalPortName="[hwPhysicalPortName]",hwPhysicalPortBIP8SDErrorThreshold=[hwPhysicalPortBIP8SDErrorThreshold])

BIP8 SD alarm.

In VS mode, this trap is supported only by the admin VS.

Trap Attributes

Trap Attribute	Description
Alarm or Event	Alarm
Trap Severity	Critical
Mnemonic Code	hwPhysicalPortBip8SdError
Trap OID	1.3.6.1.4.1.2011.5.25.157.2.157.7
MIB	HUAWEI-PORT-MIB
Alarm ID	0x0813008e
Alarm Name	hwPhysicalPortBip8SdError
Alarm Type	equipmentAlarm
Raise or Clear	Raise
Match trap	PIC_1.3.6.1.4.1.2011.5.25.157.2.157.8 hwPhysicalPortBip8SdErrorResume

Trap Buffer Parameters

Parameter	Description
hwPhysicalPortIfIndex	Index of physical port.
hwPhysicalPortName	Name of physical port.
hwPhysicalPortBIP8SDErrorThreshold	BIP8-SD error alarm threshold.

VB Parameters

VB OID	VB Name	VB Index
1.3.6.1.4.1.2011.5.25.157.1.14.1.1.1	hwPhysicalPortThrIfIndex	hwPhysicalPortThrIfIndex
1.3.6.1.4.1.2011.5.25.157.1.14.1.1.2	hwPhysicalPortThrName	hwPhysicalPortThrIfIndex
1.3.6.1.4.1.2011.5.25.157.1.14.1.1.23	hwPhysicalPortBIP8SDErrorThreshold	hwPhysicalPortThrIfIndex

Impact on the System

Data of some services on the interface will be dropped.

Possible Causes

Cause 0: The optical module failed.
Cause 1: The optical fiber failed.

Procedure

1.Replace the optical module and check whether the alarm is cleared.

If the alarm is cleared, go to End.
If the alarm persists, go to Step 2.

2.Replace the optical fiber and check whether the alarm is cleared.

If the alarm is cleared, go to End.
If the alarm persists, go to Step 3.

3.Collect alarm information, log information and configuration information, and then contact technical support personnel.

4.End.