PIC_1.3.6.1.4.1.2011.5.25.157.2.16 hwB1TcaAlarmResume

Trap Buffer Description

B1 threshold crossing alarm is cleared.(hwPhysicalPortIfIndex=[hwPhysicalPortIfIndex],BoardID=[hwPhysicalPortInSlot], CardID=[hwPhysicalPortInCard], PortID=[hwPhysicalPortInPort], InterfaceName=[hwPhysicalPortName])

In VS mode, this trap is supported only by the admin VS.

Trap Attributes

Trap Attribute	Description
Alarm or Event	Alarm
Trap Severity	Error
Mnemonic Code	hwB1TcaAlarm
Trap OID	1.3.6.1.4.1.2011.5.25.157.2.16
MIB	HUAWEI-PORT-MIB
Alarm ID	0x08130090
Alarm Name	hwB1TcaAlarm
Alarm Type	communicationsAlarm
Raise or Clear	Clear
Match trap	PIC_1.3.6.1.4.1.2011.5.25.157.2.15 hwB1TcaAlarm

Trap Buffer Parameters

Parameter	Description
hwPhysicalPortIfIndex	Index of the physical port.
hwPhysicalPortInSlot	Slot ID.
hwPhysicalPortInCard	Card ID.
hwPhysicalPortInPort	Port ID.
hwPhysicalPortName	Name of physical port.

VB Parameters

VB OID	VB Name	VB Index
1.3.6.1.4.1.2011.5.25.157.1.8.1.1.6	hwPhysicalPortInSlot	hwPhysicalPortIfIndex
1.3.6.1.4.1.2011.5.25.157.1.8.1.1.7	hwPhysicalPortInCard	hwPhysicalPortIfIndex
1.3.6.1.4.1.2011.5.25.157.1.8.1.1.8	hwPhysicalPortInPort	hwPhysicalPortIfIndex
1.3.6.1.4.1.2011.5.25.157.1.8.1.1.4	hwPhysicalPortName	hwPhysicalPortIfIndex

Impact on the System

Services are not affected.

Possible Causes

Cause 0: The fiber cut is rectified.
Cause 1: The fault of excessive line attenuation was rectified.
Cause 2: The transmit part of the opposite station recovers from a fault.
Cause 3: The cross-connect board at the opposite station recovers from a fault or is not in position.
Cause 4: The clock board at the opposite station recovers from a fault.

Procedure

This trap message is informational only, and no action is required.