The interfaces in this group worked in different transmission modes.(IfIndex=[IfIndex], SlotId=[SlotId], CardId=[CardId], PortId=[PortId], ReasonDescription=[ReasonDescription])
The interfaces of the same group did not work in the same transmission mode.
In VS mode, this trap is supported only by the admin VS.
| Trap Attribute | Description |
|---|---|
Alarm or Event |
Alarm |
Trap Severity |
Critical |
Mnemonic Code |
hwPortGroupTransModeDiff |
Trap OID |
1.3.6.1.4.1.2011.5.25.157.2.242 |
MIB |
HUAWEI-PORT-MIB |
Alarm ID |
0x00F100bb |
Alarm Name |
hwPortGroupTransModeDiff |
Alarm Type |
communicationsAlarm |
Raise or Clear |
Raise |
Match trap |
PIC_1.3.6.1.4.1.2011.5.25.157.2.243 hwPortGroupTransModeDiffResume |
| Parameter | Description |
|---|---|
IfIndex |
Index of physical port. |
SlotId |
Slot ID. |
CardId |
Card ID. |
PortId |
Port ID. |
ReasonDescription |
Reason Description. |
| VB OID | VB Name | VB Index |
|---|---|---|
1.3.6.1.4.1.2011.5.25.157.1.8.1.1.6 |
hwPhysicalPortInSlot |
hwPhysicalPortIfIndex |
1.3.6.1.4.1.2011.5.25.157.1.8.1.1.7 |
hwPhysicalPortInCard |
hwPhysicalPortIfIndex |
1.3.6.1.4.1.2011.5.25.157.1.8.1.1.30 |
hwPhysicalPortGroupID |
hwPhysicalPortIfIndex |
1.3.6.1.4.1.2011.5.25.157.1.8.1.1.31 |
hwPortTransModeReasonDescr |
hwPhysicalPortIfIndex |
1.Run the set transfer-mode command to configure all the interfaces in this group to work in the same transmission mode.
2.Collect alarm information, log information and configuration information, and then contact technical support personnel.
3.End.