PIC_1.3.6.1.4.1.2011.5.25.219.2.4.3 hwOpticalFail-135947

Trap Buffer Description

The optical module failed partially. (EntityPhysicalIndex=[EntityPhysicalIndex], EntPhysicalIndex=[EntPhysicalIndex], EntPhysicalName=[EntPhysicalName], EntityTrapFaultID=135947, ReasonDescription=The Smart-Clock module frequency lock state is failed.)

The optical module failed partially.

In VS mode, this trap is supported only by the admin VS.

Trap Attributes

Trap Attribute	Description
Alarm or Event	Alarm
Trap Severity	Alert
Mnemonic Code	hwOpticalFail
Trap OID	1.3.6.1.4.1.2011.5.25.219.2.4.3
MIB	HUAWEI-ENTITY-TRAP-MIB
Alarm ID	0x08130058
Alarm Name	hwOpticalFail
Alarm Type	equipmentAlarm
Raise or Clear	Raise
Match trap	PIC_1.3.6.1.4.1.2011.5.25.219.2.4.4 hwOpticalFailResume-135947

Trap Buffer Parameters

Parameter	Description
EntityPhysicalIndex	Index of the physical entity.
EntPhysicalIndex	Index of the physical entity.
EntityTrapFaultID	Error code.
EntPhysicalName	Name of the physical entity.
ReasonDescription	Indicates the description of the possible cause.

VB Parameters

VB OID	VB Name	VB Index
1.3.6.1.4.1.2011.5.25.219.1.1	hwEntityPhysicalIndex	-
1.3.6.1.2.1.47.1.1.1.1.7	entPhysicalName	entPhysicalIndex
1.3.6.1.4.1.2011.5.25.219.1.3	hwEntityTrapFaultID	-

Impact on the System

The frequency synchronization service on the interface where the Smart-Clock module resides is abnormal.

Possible Causes

The Smart-Clock module frequency lock state is failed.

Procedure

1. Adjust the GPS antenna. Then, check whether the alarm is cleared.

If the alarm is cleared, go to Step 4.
If the alarm is not cleared, go to Step 2.

2. Replace the antenna system. Then, check whether the alarm is cleared.

If the alarm is cleared, go to Step 4.
If the alarm is not cleared, go to Step 2.

3. Collect alarm information, log information and configuration information, and then contact technical support personnel.

4. End.