PIM-STD_1.3.6.1.2.1.157.0.3 piminvalidjoinprune

Trap Buffer Description

PIM receives an Invalid Join/Prune message. (GroupMappingOrigin=[GroupMappingOrigin], GroupMappingAddrType=[GroupMappingAddrType], GrpAddr=[GrpAddr], GrpPfxLen=[GrpPfxLen], GroupMappingRPAddrType=[GroupMappingRPAddrType], RPAddr=[RPAddr], GroupMappingPimMode=[GroupMappingPimMode], InvJPAddrType=[InvJPAddrType], InvJPOriginAddr=[InvJPOriginAddr], InvJPGrpAddr=[InvJPGrpAddr], InvJPRpAddr=[InvJPRpAddr], NbrIfIndex=[NbrIfIndex], NbrAddrType=[NbrAddrType], NbrAddr=[NbrAddr], NbrUpTime=[NbrUpTime])

PIM·received·invalid·Join/Prune·messages.

Trap Attributes

Trap Attribute Description

Alarm or Event

Event

Trap Severity

Warning

Mnemonic Code

INVALID_JP

Trap OID

1.3.6.1.2.1.157.0.3

MIB

PIM-STD-MIB

Alarm ID

This is an event trap and does not involve alarm ID.

Alarm Name

This is an event trap and does not involve alarm name.

Alarm Type

This is an event trap and does not involve alarm type.

Raise or Clear

This is an event trap and does not involve alarm generation or clearance.

Match trap

-

Trap Buffer Parameters

Parameter Description

GroupMappingOrigin

RP type.

GroupMappingAddrType

Group address type.

GrpAddr

Group address in the Join/Prune message.

GrpPfxLen

Mask length of the multicast group address.

GroupMappingRPAddrType

RP address type.

RPAddr

RP address.

GroupMappingPimMode

Current PIM mode.

InvJPAddrType

Address type of the invalid Join/Prune messages.

InvJPOriginAddr

Source address of the invalid Join/Prune messages.

InvJPGrpAddr

Group address of the invalid Join/Prune messages.

InvJPRpAddr

RP address of the invalid Join/Prune messages.

NbrIfIndex

Index of the neighboring interface.

NbrAddrType

Address type of the neighboring interface.

NbrAddr

Address of the neighboring interface.

NbrUpTime

Lifetime of the neighbor relationship.

VB Parameters

VB OID VB Name VB Index

1.3.6.1.2.1.157.1.13.1.7

pimGroupMappingPimMode

pimGroupMappingOrigin

pimGroupMappingAddressType

pimGroupMappingGrpAddress

pimGroupMappingGrpPrefixLength

pimGroupMappingRPAddressType

pimGroupMappingRPAddress

1.3.6.1.2.1.157.1.39

pimInvalidJoinPruneAddressType

-

1.3.6.1.2.1.157.1.40

pimInvalidJoinPruneOrigin

-

1.3.6.1.2.1.157.1.41

pimInvalidJoinPruneGroup

-

1.3.6.1.2.1.157.1.42

pimInvalidJoinPruneRp

-

1.3.6.1.2.1.157.1.2.1.6

pimNeighborUpTime

pimNeighborIfIndex

pimNeighborAddressType

pimNeighborAddress

Impact on the System

After the RP receives an invalid Join or Prune message, information about multicast members fails to reach the RP.

Possible Causes

Cause 1: The RP address carried in the received Join or Prune message was different from that specified on the device.

Cause 2: A Join or Prune message of (*.G) or (S, G, RPT) type was received but its group address was in the SSM range specified on the device.

Procedure

Cause·1:·The·RP·address·carried·in·the·received·Join·or·Prune·message·was·different·from·that·specified·on·the·device.

  • Run·the·display·pim·rp-info·command·to·check·whether·the·RP·configurations·of·the·device·that·sends·the·Join/Prune·message·are·the·same·as·those·of·the·local·device.
  • If·the·RP·configurations·of·the·device·that·sends·the·Join/Prune·message·are·the·same·as·those·of·the·local·device,·go·to·Step·2.
  • If·the·RP·configurations·of·the·device·that·sends·the·Join/Prune·message·are·different·from·those·of·the·local·device,·configure·a·same·RP·for·the·devices.
  • Collect·log·information·and·configuration·information,·and·then·contact·technical·support·personnel..

Cause·2:·A·Join·or·Prune·message·of·(*.G)·or·(S,·G,·RPT)·type·was·received·but·its·group·address·was·in·the·SSM·range·specified·on·the·device.

Run·the·display·current-configuration·command·to·check·whether·the·SSM·group·address·range·on·the·device·that·sends·the·Join/Prune·message·is·the·same·as·that·on·the·local·device.

  • If·the·SSM·group·address·range·on·the·device·that·sends·the·Join/Prune·message·is·the·same·as·that·on·the·local·device,·go·to·Step·2.
  • If·the·SSM·group·address·range·on·the·device·that·sends·the·Join/Prune·message·is·different·from·that·on·the·local·device,·configure·a·same·SSM·group·address·range·for·the·devices..
  • Collect·log·information·and·configuration·information,·and·then·contact·technical·support·personnel..
Copyright © Huawei Technologies Co., Ltd.
Copyright © Huawei Technologies Co., Ltd.
< Previous topic Next topic >