PTP 1588 ACR/ATR PDV performance status change. (State=[State])
The options of State are as follows: normal limitExceed
In VS mode, this trap is supported only by the admin VS.
| Trap Attribute | Description |
|---|---|
Alarm or Event |
Event |
Trap Severity |
Warning |
Mnemonic Code |
PTPPDVLIMITEXCEED |
Trap OID |
1.3.6.1.4.1.2011.5.25.187.5.26 |
MIB |
HUAWEI-PTP-MIB |
Alarm ID |
This is an event trap and does not involve alarm ID. |
Alarm Name |
This is an event trap and does not involve alarm name. |
Alarm Type |
This is an event trap and does not involve alarm type. |
Raise or Clear |
This is an event trap and does not involve alarm generation or clearance. |
Match trap |
- |
| Parameter | Description |
|---|---|
State |
The 1588 ACR/ATR PDV data performance exceeds the threshold. |
| VB OID | VB Name | VB Index |
|---|---|---|
1.3.6.1.4.1.2011.5.25.187.1.107 |
hwPtpPdvLimitExceedStatus |
- |
1. If congestion occurs on the link, check whether the link bandwidth is sufficient. You can adjust the packet priority through configuration.
The command for adjusting the packet priority is as follows:
system
Enter system view, return user view with return command.
[-system]ptp-adaptive dscp 1
2. Collect trap, log, and configuration information, and contact technical support.
3. End.