SFLOW_1.3.6.1.4.1.2011.5.25.368.1.2.1 hwSFlowUnsupportedBoard
Trap Buffer Description
The board doesn't support sFlow. (Slot=[hwSFlowEnSlot])
The board does not support sFlow.
In VS mode, this trap is supported only by the admin VS.
Trap Attributes
| Trap Attribute | Description |
|---|---|
Alarm or Event |
Alarm |
Trap Severity |
Warning |
Mnemonic Code |
hwSflowUnsupportedBoard |
Trap OID |
1.3.6.1.4.1.2011.5.25.368.1.2.1 |
MIB |
HUAWEI-SFLOW-MIB |
Alarm ID |
0x00f10479 |
Alarm Name |
hwSFlowUnsupportedBoard |
Alarm Type |
equipmentAlarm |
Raise or Clear |
Raise |
Match trap |
SFLOW_1.3.6.1.4.1.2011.5.25.368.1.2.2 hwSFlowUnsupportedBoardResume |
Trap Buffer Parameters
| Parameter | Description |
|---|---|
hwSFlowEnSlot |
Slot ID. |
VB Parameters
| VB OID | VB Name | VB Index |
|---|---|---|
1.3.6.1.4.1.2011.5.25.368.1.1.1 |
hwSFlowEnSlot |
- |
Procedure
1. Check whether the card supports sFlow based on the slot ID in the alarm information.
2. Replace the card with one that supports sFlow or delete the sFlow configuration in the slot view. Check whether the alarm is cleared.
- If the alarm is cleared, go to Step 4.
- If the alarm persists, go to Step 3.
3. Collect trap, log, and configuration information, and contact technical support personnel.
4. The procedure ends.