Tunnel protection group receives an APS switch fail alarm. (IfIndex=[WorkTunnelIfIndex], SessionTunnelId=[SessionTunnelId], LocalLspId=[LocalLspId], IngressLsrId=[IngressLsrId], EgressLsrId=[EgressLsrId],WorkTunnel=[WorkTunnel], SignalingProtocol=[SgnlPrtcl], SignalledTunnelName=[SignalledTunnelName])
A alarm was generated when tunnel protection group receives an APS switch fail.
| Trap Attribute | Description |
|---|---|
Alarm or Event |
Alarm |
Trap Severity |
Error |
Mnemonic Code |
TUNNEL_APS_SWITCHFAIL |
Trap OID |
1.3.6.1.4.1.2011.5.12.7.1.4.11 |
MIB |
HUAWEI-MPLSOAM-MIB |
Alarm ID |
0x0001009f |
Alarm Name |
TUNNEL_APS_SWITCHFAIL |
Alarm Type |
processingErrorAlarm |
Raise or Clear |
Raise |
Match trap |
TUNNEL-TE_1.3.6.1.4.1.2011.5.12.7.1.4.12 hwMplsApsSwitchFailRecovery |
| Parameter | Description |
|---|---|
SessionTunnelId |
Tunnel ID of a session |
LocalLspId |
LSP ID of a tunnel session |
IngressLsrId |
LSR ID of the ingress of a tunnel |
EgressLsrId |
LSR ID of the egress of a tunnel |
WorkTunnel |
Name of the working tunnel in a tunnel protection group |
SgnlPrtcl |
Signaling protocol used by a tunnel session Range of value:
|
WorkTunnelIfIndex |
Work Tunnel Interface Index |
SignalledTunnelName |
Tunnel alias. |
| VB OID | VB Name | VB Index |
|---|---|---|
1.3.6.1.4.1.2011.5.12.7.1.3.1.1.3 |
hwMplsPsWorkTunnName |
hwMplsPsIndex |
1.3.6.1.4.1.2011.5.25.121.1.1.1.30 |
hwMplsTunnelSignalProto |
hwMplsTunnelIndex hwMplsTunnelInstance hwMplsTunnelIngressLSRId hwMplsTunnelEgressLSRId |
1.3.6.1.4.1.2011.5.25.121.1.1.1.33 |
hwMplsTunnelSignalledTunnelName |
hwMplsTunnelIndex hwMplsTunnelInstance hwMplsTunnelIngressLSRId hwMplsTunnelEgressLSRId |
1. Check whether the configuration is consistent at the two ends of the APS protection group.
2. Deactivate and reactivate the APS protection at the two ends.