The VRRP status changed to master. (ifIndex=[ifIndex], VrId=[VrId], MasterIPAddress=[MasterIPAddress], sysName=[sysName], ifName=[ifName], ChangeReason=[ChangeReason])
The status of a router was changed to master.
| Trap Attribute | Description |
|---|---|
Alarm or Event |
Event |
Trap Severity |
Warning |
Mnemonic Code |
vrrpTrapNewMaster |
Trap OID |
1.3.6.1.2.1.68.0.1 |
MIB |
VRRP-MIB |
Alarm ID |
This is an event trap and does not involve alarm ID. |
Alarm Name |
This is an event trap and does not involve alarm name. |
Alarm Type |
This is an event trap and does not involve alarm type. |
Raise or Clear |
This is an event trap and does not involve alarm generation or clearance. |
Match trap |
- |
| Parameter | Description |
|---|---|
ifIndex |
Index of the interface where VRRP is configured. |
MasterIPAddress |
IP address of the master device in the VRRP group. |
sysName |
System name. |
ifName |
Name of the interface where VRRP is configured. |
ChangeReason |
VRRP status change reason. |
| VB OID | VB Name | VB Index |
|---|---|---|
1.3.6.1.2.1.68.1.3.1.7 |
vrrpOperMasterIpAddr |
ifIndex vrrpOperVrId |
The status of a router was changed to master.
Cause 1: VRRP negotiation of the master device timed out due to a network fault.
Cause 2: The priority of the device in the VRRP group was changed using the vrrp vrid virtual-router-id priority priority-value command.
Cause 3: The virtual IP address of the VRRP group was changed using the vrrp vrid virtual-router-id [ virtual-ip virtual-address ] command.
Cause 4: An mVRRP group switchover occurred.