ARP_1.3.6.1.4.1.2011.5.25.123.2.5 hwEthernetARPThresholdResumeAlarm

Trap Buffer Description

The number of ARP entries was restored to the threshold. (entPhysicalIndex=[entPhysicalIndex], Slot name=[slotname], Threshold=[Threshold], Number of dynamic ARP entries=[DynEntries], Number of static ARP entries=[StatEntries])

Trap Attributes

Trap Attribute	Description
Alarm or Event	Alarm
Trap Severity	Warning
Mnemonic Code	hwethernetarpthresholdexceedalarm
Trap OID	1.3.6.1.4.1.2011.5.25.123.2.5
MIB	HUAWEI-ETHARP-MIB
Alarm ID	0x0859200b
Alarm Name	hwEthernetARPThresholdExceedAlarm
Alarm Type	qualityOfServiceAlarm
Raise or Clear	Clear
Match trap	ARP_1.3.6.1.4.1.2011.5.25.123.2.4 hwEthernetARPThresholdExceedAlarm

Trap Buffer Parameters

Parameter	Description
entPhysicalIndex	Indicates the index of the physical entity.
slotname	Indicates the board name.
Threshold	Indicates the alarm threshold.
DynEntries	Indicates the number of dynamic ARP entries.
StatEntries	Indicates the number of static ARP entries.

VB Parameters

VB OID	VB Name	VB Index
1.3.6.1.2.1.47.1.1.1.1.7	entPhysicalName	entPhysicalIndex
1.3.6.1.4.1.2011.5.25.123.1.26.1	hwEthernetARPThresholdValue	-
1.3.6.1.4.1.2011.5.25.123.1.26.2	hwEthernetARPThresholdDynamicNumber	-
1.3.6.1.4.1.2011.5.25.123.1.26.3	hwEthernetARPThresholdStaticNumber	-

Impact on the System

Services are not affected.

Possible Causes

The number of ARP entries on the device fell below the upper threshold.

Procedure

1. This alarm message is informational only, and no action is required.