BGP_1.3.6.1.4.1.2011.5.25.177.1.3.31 bgpPeerAfRouteExceed

Trap Buffer Description

The number of routes received from peers in a BGP address family reached the maximum value. (Address Family=[AddressFamily], MaxRouteNumber=[RouteLimitNum], BGP instance name=[InstanceName])

The number of routes received from peers in a BGP address family reached the maximum value.

Trap Attributes

Trap Attribute	Description
Alarm or Event	Alarm
Trap Severity	Critical
Mnemonic Code	hwBgpPeerAddrFamilyRouteExceed
Trap OID	1.3.6.1.4.1.2011.5.25.177.1.3.31
MIB	HUAWEI-BGP-VPN-MIB
Alarm ID	0x00f10391
Alarm Name	hwBgpPeerAddrFamilyRouteExceed
Alarm Type	communicationsAlarm
Raise or Clear	Raise
Match trap	BGP_1.3.6.1.4.1.2011.5.25.177.1.3.32 bgpPeerAfRouteExceedClear

Trap Buffer Parameters

Parameter	Description
AddressFamily	Address family
RouteLimitNum	The maximum route number
InstanceName	BGP instance name. "-" indicates the default BGP instance, and other values indicate multiple instances.

VB Parameters

VB OID	VB Name	VB Index
1.3.6.1.4.1.2011.5.25.177.1.2.2.1.5	hwBgpVrfAddressFamily	hwBgpVrfRouteType hwBgpVrfInstName hwBgpVrfAddressFamily
1.3.6.1.4.1.2011.5.25.177.1.2.1.3	hwBgpRouteMaxNum	-
1.3.6.1.4.1.2011.5.25.177.1.5.1.1.1	hwBgpProcessName	hwBgpProcessName

VB OID

VB Name

VB Index

1.3.6.1.4.1.2011.5.25.177.1.2.2.1.5

hwBgpVrfAddressFamily

hwBgpVrfRouteType

hwBgpVrfInstName

hwBgpVrfAddressFamily

1.3.6.1.4.1.2011.5.25.177.1.2.1.3

hwBgpRouteMaxNum

1.3.6.1.4.1.2011.5.25.177.1.5.1.1.1

hwBgpProcessName

Impact on the System

The number of routes received from peers in the address family has reached the specification, and no more new routes can be received.

Possible Causes

The number of routes received from peers in a BGP address family reached the maximum value.

Procedure

1. Reduce the number of routes sent by the peer end. Then, check whether the alarm is cleared. That is, check whether the matching clear alarm (hwBgpPeerAddrFamilyRouteExceedClear) is generated. - If the clear alarm is generated, go to Step 3. - If the clear alarm is not generated, go to Step 2. 2. Collect alarm information and configuration information, and then contact technical support personnel. 3. End.