BGP_1.3.6.1.4.1.2011.5.25.177.1.3.48 hwBgpSidLabelConflict

Trap Buffer Description

The prefix-sid label conflict is detected. (label=[Label], Vpn instance =[Vpn-instance], BGP instance name=[InstanceName], Address Family=[AddressFamily], prefix=[Prefix])

The prefix-sid label conflict is detected.

Trap Attributes

Trap Attribute	Description
Alarm or Event	Alarm
Trap Severity	Error
Mnemonic Code	hwBgpSidLabelConflict
Trap OID	1.3.6.1.4.1.2011.5.25.177.1.3.48
MIB	HUAWEI-BGP-VPN-MIB
Alarm ID	0x00f103e4
Alarm Name	hwBgpSidLabelConflict
Alarm Type	communicationsAlarm
Raise or Clear	Raise
Match trap	BGP_1.3.6.1.4.1.2011.5.25.177.1.3.49 hwBgpSidLabelConflictClear

Trap Buffer Parameters

Parameter	Description
Label	Label.
Vpn-instance	VPN instance name.
InstanceName	BGP instance name. "-" indicates the default BGP instance, and other values indicate multiple instances.
AddressFamily	Address family.
Prefix	Route.

VB Parameters

VB OID	VB Name	VB Index
1.3.6.1.4.1.2011.5.25.177.1.2.2.1.5	hwBgpVrfAddressFamily	hwBgpVrfRouteType hwBgpVrfInstName hwBgpVrfAddressFamily
1.3.6.1.4.1.2011.5.25.177.1.2.6.1	hwBgpPrefixSidLabel	-
1.3.6.1.4.1.2011.5.25.177.1.5.1.1.1	hwBgpProcessName	hwBgpProcessName
1.3.6.1.4.1.2011.5.25.177.1.2.5.1	hwBgpVrfName	-
1.3.6.1.4.1.2011.5.25.177.1.2.6.2	hwBgpRoutePrefix	-

Impact on the System

BGP does not advertise routes with conflicting labels.

Possible Causes

Cause 1: The label applied for the BGP route learned from another device is the same as the label applied for the network route on the local device.

Cause 2: The BGP and OSPF processes need to apply for the same label.

Cause 3: The BGP and ISIS processes need to apply for the same label.

Procedure

1. If a BGP process label conflict occurs, run the network {ipv4-address [mask | mask-length]} route-filter route-filter-name [non-relay-tunnel] label-index label-index-value command on the source or local device to change the label-index of the route. 2. If the label of a BGP process conflicts with that of an OSPF process, run the network {ipv4-address [mask | mask-length]} route-filter route-filter-name [non-relay-tunnel] label-index label-index-value command in the BGP view to change the label-index of the route, or run the ospf prefix-sid {absolute sid-value | index index-value} [node-disable] command in the interface view to change the label-index of the interface. 2. If the label of a BGP process conflicts with that of an IS-IS process, run the network {ipv4-address [mask | mask-length]} route-filter route-filter-name [non-relay-tunnel] label-index label-index-value command in the BGP view to change the label-index of the route, or run the isis prefix-sid {absolute sid-value | index index-value} [node-disable] command in the interface view to change the label-index of the interface. 4. Collect alarm and configuration information and contact technical support engineers.