BRASAAA_1.3.6.1.4.1.2011.5.2.2.2.0.16 hwOnlineUserNumUpperLimitAlarm
Trap Buffer Description
The number of users on the device reached the upper threshold. (MaxUserThreshold=[threshold])
The number of users on the device reached the upper threshold.
In VS mode, this trap is supported only by the admin VS.
Trap Attributes
| Trap Attribute | Description |
|---|---|
Alarm or Event |
Alarm |
Trap Severity |
Warning |
Mnemonic Code |
hwOnlineUserNumUpperLimitAlarm |
Trap OID |
1.3.6.1.4.1.2011.5.2.2.2.0.16 |
MIB |
HUAWEI-AAA-MIB |
Alarm ID |
0x0aeb2023 |
Alarm Name |
hwOnlineUserNumUpperLimitAlarm |
Alarm Type |
qualityOfServiceAlarm |
Raise or Clear |
Raise |
Match trap |
BRASAAA_1.3.6.1.4.1.2011.5.2.2.2.0.17 hwOnlineUserNumUpperLimitResume |
Trap Buffer Parameters
| Parameter | Description |
|---|---|
threshold |
Upper limit of the number of login users on a device, in percentages. If the value is 80,the threshold is 80% |
VB Parameters
| VB OID | VB Name | VB Index |
|---|---|---|
1.3.6.1.4.1.2011.5.2.1.13.1.30 |
hwOnlineUserNumUpperLimitThreshold |
- |
Procedure
1.Run the display this command in the system view to check whether the upper limit is appropriate.
- If the upper limit is too low, go to Step 2.
- If the upper limit is appropriate, go to Step 3.
2.Run the user-warning-threshold upper-limit command to reconfigure the upper limit.
3.Run the display access-user command in the system view to view the current number of login users.
- If the number reaches or approaches the upper limit, add more boards.
- If the number is an appropriate value, go to Step 4.
4.Collect trap, log, and configuration information, and contact technical support personnel.
5.End.