BRASAAA_1.3.6.1.4.1.2011.5.2.2.2.0.20 hwIPLowerlimitWarningAlarm
Trap Buffer Description
The IP address usage of the domain [domainName] fell below the lower threshold. (Domain index = [domainIndex],MinThreshold=[threshold])
The IP address usage of the domain fell below the lower threshold.
In VS mode, this trap is supported only by the admin VS.
Trap Attributes
| Trap Attribute | Description |
|---|---|
Alarm or Event |
Alarm |
Trap Severity |
Warning |
Mnemonic Code |
hwIPLowerlimitWarningAlarm |
Trap OID |
1.3.6.1.4.1.2011.5.2.2.2.0.20 |
MIB |
HUAWEI-AAA-MIB |
Alarm ID |
0x0aeb2013 |
Alarm Name |
hwIPLowerlimitWarningAlarm |
Alarm Type |
qualityOfServiceAlarm |
Raise or Clear |
Raise |
Match trap |
BRASAAA_1.3.6.1.4.1.2011.5.2.2.2.0.21 hwIPLowerlimitWarningResume |
Trap Buffer Parameters
| Parameter | Description |
|---|---|
domainName |
Name of the domain |
domainIndex |
Index of the domain |
threshold |
Lower limit, in percentages. If the value is 80,the threshold is 80%. |
VB Parameters
| VB OID | VB Name | VB Index |
|---|---|---|
1.3.6.1.4.1.2011.5.2.2.1.1 |
hwDomainIndex |
- |
1.3.6.1.4.1.2011.5.2.1.4.1.1 |
hwDomainName |
hwDomainName |
1.3.6.1.4.1.2011.5.2.1.47.1.3 |
hwPoolLowerLimitWarningThreshold |
hwDomainName |
Procedure
1.Run the display domain domain-name command in the system view to check whether the lower limit is appropriate.
- If the lower limit is too high, go to Step 2.
- If the lower limit is appropriate, go to Step 3.
2.Run the ip-warning-threshold lower-limit command in the AAA domain view to reconfigure the lower limit.
3.Run the display domain domain-name command in the system view to check the current IP address usage.
- If the IP address usage falls to or approaches the lower limit, run the display aaa offline-record brief command to check whether the logout reason is User request to offline.
- a.If the logout reason is User request to offline, no action is required.
- b.If the logout reason is not User request to offline, contact technical support personnel.
- If the IP address usage is an appropriate value, go to Step 4.
4.Collect trap, log, and configuration information, and contact technical support personnel.
5.End.