BRASAAA_1.3.6.1.4.1.2011.5.2.2.2.0.30 hwRemoteDownloadAclThresholdResume
Trap Buffer Description
The usage of the dynamically delivered traffic classifiers fell below 90% of a specified alarm threshold. (Classifier Number = [classifierNum], Threshold = [threshold])
In VS mode, this trap is supported only by the admin VS.
Trap Attributes
| Trap Attribute | Description |
|---|---|
Alarm or Event |
Alarm |
Trap Severity |
Warning |
Mnemonic Code |
hwRemoteDownloadAclThresholdAlarm |
Trap OID |
1.3.6.1.4.1.2011.5.2.2.2.0.30 |
MIB |
HUAWEI-AAA-MIB |
Alarm ID |
0x0aeb201d |
Alarm Name |
hwRemoteDownloadAclThresholdAlarm |
Alarm Type |
qualityOfServiceAlarm |
Raise or Clear |
Clear |
Match trap |
BRASAAA_1.3.6.1.4.1.2011.5.2.2.2.0.29 hwRemoteDownloadAclThresholdAlarm |
Trap Buffer Parameters
| Parameter | Description |
|---|---|
classifierNum |
The used number of dynamically delivered traffic classifiers |
threshold |
The threshold value of the usage of the dynamically delivered traffic classifiers |
VB Parameters
| VB OID | VB Name | VB Index |
|---|---|---|
1.3.6.1.4.1.2011.5.2.2.1.16 |
hwRemoteDownloadAclUsedValue |
- |
1.3.6.1.4.1.2011.5.2.2.1.17 |
hwRemoteDownloadAclThresholdValue |
- |
Procedure
1.Run the display alarm command in the system view to check whether any hwRemoteDownloadAclThresholdAlarm alarm was generated.
2.Check whether the usage of the dynamically delivered traffic classifiers fell below 90% of a specified alarm threshold.
- If yes, no further action is required.
- If no, go to Step 3.
3.Collect trap, log, and configuration information, and contact technical support personnel.
4.End.