BRASAAA_1.3.6.1.4.1.2011.5.2.2.2.0.55 hwAAAChasisIPv6AddressThresholdAlarm

Trap Buffer Description

The number of ipv6 address reached the upper limit of the device. (hwAAAChasisIpv6AddrThreshold=[threshold])

The number of ipv6 address reached the upper limit of the device.

In VS mode, this trap is supported only by the admin VS.

This alarm is supported only on NetEngine 8000 F1A.

Trap Attributes

Trap Attribute Description

Alarm or Event

Alarm

Trap Severity

Warning

Mnemonic Code

hwAAAChasisIPv6AddressThresholdAlarm

Trap OID

1.3.6.1.4.1.2011.5.2.2.2.0.55

MIB

HUAWEI-AAA-MIB

Alarm ID

0x0aeb2025

Alarm Name

hwAAAChasisIPv6AddressThresholdAlarm

Alarm Type

qualityOfServiceAlarm

Raise or Clear

Raise

Match trap

BRASAAA_1.3.6.1.4.1.2011.5.2.2.2.0.56 hwAAAChasisIPv6AddressThresholdResume

Trap Buffer Parameters

Parameter Description

threshold

Upper threshold for IPv6 addresses used on the device

VB Parameters

VB OID VB Name VB Index

1.3.6.1.4.1.2011.5.2.2.1.36

hwAAAChasisIPv6AddressThreshold

-

Impact on the System

New users cannot go online.

Possible Causes

Cause 1: A large number of users went online, and the number of IPv6 addresses used on the device reached the configured upper threshold.

Cause 2: A small upper threshold was configured.

Procedure

Collect trap, log, and configuration information, and contact technical support personnel.
Copyright © Huawei Technologies Co., Ltd.
Copyright © Huawei Technologies Co., Ltd.
< Previous topic Next topic >