BRASAAA_1.3.6.1.4.1.2011.5.2.2.3.0.2 hwHarddiskReachThreshold
Trap Buffer Description
Cfcard or Hd is out of threshold.(Free=[free-para], Threshold=[threshold-para])
The CF card or hard disk usage exceeded the threshold.
In VS mode, this trap is supported only by the admin VS.
Trap Attributes
| Trap Attribute | Description |
|---|---|
Alarm or Event |
Event |
Trap Severity |
Warning |
Mnemonic Code |
hwHarddiskReachThreshold |
Trap OID |
1.3.6.1.4.1.2011.5.2.2.3.0.2 |
MIB |
HUAWEI-AAA-MIB |
Alarm ID |
This is an event trap and does not involve alarm ID. |
Alarm Name |
This is an event trap and does not involve alarm name. |
Alarm Type |
This is an event trap and does not involve alarm type. |
Raise or Clear |
This is an event trap and does not involve alarm generation or clearance. |
Match trap |
- |
Trap Buffer Parameters
| Parameter | Description |
|---|---|
free-para |
Remaining space of bills in the CF card or hard disk. |
threshold-para |
Alarm threshold for remaining space of bills in the CF card or hard disk. |
VB Parameters
| VB OID | VB Name | VB Index |
|---|---|---|
1.3.6.1.4.1.2011.5.2.2.1.2 |
hwHdFreeamount |
- |
1.3.6.1.4.1.2011.5.2.2.1.3 |
hwHdWarningThreshold |
- |
Procedure
1. Run the bill-server ip-address filename file-name [user-name user-name password cipher cipher-password port] command in the local-aaa-server view to configure the IP address, backup file name, username, and password of the backup CDR server so that newly generated local CDRs can be saved to the backup CDR server.
2. Run the local-bill cfcard backup file-name command in the local-aaa-server view to manually back up CF card CDRs to the CDR server to release space.
- If the space is successfully released, go to Step 4.
- If the space fails to be released, go to Step 3.
3. Collect alarm, log, and configuration information, and contact technical support personnel.
4. End.